Encapsulating sulphur inside Magnéli phase Ti4O7 nanotube array for high performance lithium sulphur battery cathode
- 13 May 2022
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 100 (9) , 2417-2431
Abstract
The lithium–sulphur battery is a promising system for next‐generation energy storage because of its high energy density and the abundant supply of sulphur. In this study, Magnéli phase Ti4O7 nanotube arrays (NTA) were grown on titanium nitride mesh substrates via anodization of titanium mesh followed by high‐temperature reduction under a hydrogen atmosphere. When prepared into a composite material with sulphur via electrodeposition, Ti4O7 NTA provides sulphur with high electronic conductivity and strong polysulphide chemisorption during battery operation. The structure of NTA allows sufficient access of incorporated sulphur to the liquid electrolyte and supports high sulphur loadings per unit area of the electrode. The application of an additional layer of conductive carbon coating to confine electrodeposited sulphur inside the NTA further improved the cell cycling performance. Under sulphur loadings of around 2.0 mg/cm2, high values of specific capacity (1604 mAh/g at a 1/20 C rate), ultra‐low capacity decay rate (0.03% per cycle for 1800 cycles), and versatile rate capability (660 mAh/g at 2 C and 500 mAh/g at 4 C) were achieved. Under high sulphur loadings of around 5.0 mg/cm2, stable cycling (decay rate below 0.10% per cycle) and high areal capacity (4.97 mAh/cm2) were attained.Keywords
This publication has 81 references indexed in Scilit:
- Theoretical Approaches To Estimating Homolytic Bond Dissociation Energies of Organocopper and Organosilver CompoundsThe Journal of Physical Chemistry A, 2012
- A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur BatteriesAdvanced Energy Materials, 2012
- Ultrathin Nanosheets of Li2MSiO4 (M = Fe, Mn) as High-Capacity Li-Ion Battery ElectrodeNano Letters, 2012
- New insights into the limiting parameters of the Li/S rechargeable cellJournal of Power Sources, 2012
- Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer CoatingACS Nano, 2011
- Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium–Sulfur Battery Cathode Material with High Capacity and Cycling StabilityNano Letters, 2011
- Stabilizing lithium–sulphur cathodes using polysulphide reservoirsNature Communications, 2011
- Microwave-Solvothermal Synthesis of Nanostructured Li2MSiO4/C (M = Mn and Fe) Cathodes for Lithium-Ion BatteriesChemistry of Materials, 2010
- Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheresEnergy & Environmental Science, 2010
- Effects of Nanosized Adsorbing Material on Electrochemical Properties of Sulfur Cathodes for Li/S Secondary BatteriesJournal of the Electrochemical Society, 2004