Applying Carbon Nanotubes for Enhancing Fluid Flow
Authors:
- Zainab Y. ShnainZSZainab Y. Shnain
- Asawer A. AlwasitiAAAsawer A. Alwasiti
- Musaab K. RashedMRMusaab K. Rashed
Open Access
- 1 July 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 881 (1)
Abstract
One of the economical important challenges in pipeline transportation is reducing the drag; e.g reducing the pressure drop along the pipe as much as possible. Although many efforts have been made, a universal mechanism and environmentally friendly approach to reduce the drag is still setbacks. The present work introduces an environmentally friendly method to reduce drag using microbubble, polyethylene oxide (PEO) with concentrations (100, 400,1100,1900 and 2500 ppm) and nanopaticles (carbon nano tube CNT) with concentrations (100, 400,1100,1900 and 2500 ppm). The pipeline loop was used to individually study the materials, their complexes as well as the combination of either of these with micro bubbles. The experiments were conducted in a pipeline loop to mimic the practice in the petroleum industries. The result showed that the drag reduction increases as flow and additive concentraons increases and the maximum reduction was 40% for PEO and 58% for CNT. The results also show that the use of blend additives has greater effect than the individual materials and combining the polymer, CNT suspended, and the microbubbles gave 80% drag reduction.Keywords
This publication has 13 references indexed in Scilit:
- Pipe flow drag reduction effects from carbon nanotube additivesCarbon, 2014
- Development and performance at high Reynolds number of a skin-friction reducing marine paint using polymer additivesOcean Engineering, 2014
- An experimental study of drag reduction by nanofluids through horizontal pipe turbulent flow of a Newtonian liquidJournal of Industrial and Engineering Chemistry, 2014
- High-shear drag reduction of surfactant solutionsJournal of Non-Newtonian Fluid Mechanics, 2013
- Turbulent pipe flow of a drag-reducing rigid “rod-like” polymer solutionJournal of Non-Newtonian Fluid Mechanics, 2009
- Fluidization of biomass particles: A review of experimental multiphase flow aspectsChemical Engineering Science, 2007
- Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids)International Journal of Heat and Mass Transfer, 2006
- Reynolds number effects in a turbulent pipe flow for low to moderate RePhysics of Fluids, 1997
- Water-soluble copolymers. 56. Structure and solvation effects of polyampholytes in drag reductionMacromolecules, 1994
- Effect of polymer molecular variables on drag reductionJournal of Macromolecular Science, Part B, 1980