Effect of polyol on physico-mechanical properties of polyurea film
- 24 July 2019
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2124 (1) , 020051
Abstract
The physical and mechanical properties of polyurea based polymeric toluene diisocyanate (15.5%) and polyoxypropylenediamine (POPA) as resin blend were investigated. Polyurea films were synthesized with constant molar ratio of resin blend and isocyanates. POPA acts in the resulting polyurea films through a crosslinking between backbone of the polymers. The results showed that the physical and mechanical properties of polyurea films based on toluene diisoyanate (TDI) were high and adhesion of the polyurea films to metal surface was very week. To improve the polyurea adhesions, new series of polyurea hybrid were prepared by mixing prepolymer polyurethane (PU) and POPA with constant molar ratio. Prepolymer polyurethane (PU) were prepared by polyaddition reaction using TDI as isocyanate with ratio 15.5% and polyoxypropylene glycol (PPG) as polyol. The effect of polyol on physico-mechanical properties of polyurea films was studied. Physico-mechanical properties of polyurea films were significantly affected by polyols. It was observed that on increasing the soft segments (PPG) in the PU, physico-mechanical properties of polyurea films improve significantly and become flexible with high adhesion.Keywords
This publication has 12 references indexed in Scilit:
- Use of polyurea from urea for coating of urea granulesSpringerPlus, 2016
- Applying a polyurea coating to high-performance organic cementitious materialsConstruction and Building Materials, 2013
- Dynamic mechanical and ultrasonic properties of polyureaMechanics of Materials, 2011
- Effects of TDI and FA‐703 on physico‐mechanical properties of polyurethane dispersionJournal of Applied Polymer Science, 2011
- Polyurea – The New Generation of Lining and CoatingAdvanced Materials Research, 2010
- Structure Evolution in a Polyurea Segmented Block Copolymer Because of Mechanical DeformationMacromolecules, 2008
- Applicability of the time–temperature superposition principle in modeling dynamic response of a polyureaMechanics of Time-Dependent Materials, 2007
- Stress–strain behavior of a polyurea and a polyurethane from low to high strain ratesPolymer, 2007
- Large deformation rate-dependent stress–strain behavior of polyurea and polyurethanesPolymer, 2006
- Effect of polyols and diisocyanates on thermo-mechanical and morphological properties of polyurethanesEuropean Polymer Journal, 2000