The Solidification of Lead-Zinc Smelting Slag through Bentonite Supported Alkali-Activated Slag Cementitious Material
Open Access
- 28 March 2019
- journal article
- research article
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 16 (7) , 1121
Abstract
The proper disposal of Lead-Zinc Smelting Slag (LZSS) having toxic metals is a great challenge for a sustainable environment. In the present study, this challenge was overcome by its solidification/stabilization through alkali-activated cementitious material i.e., Blast Furnace Slag (BFS). The different parameters (water glass modulus, liquid-solid ratio and curing temperature) regarding strength development were optimized through single factor and orthogonal experiments. The LZSS was solidified in samples that had the highest compressive strength (after factor optimization) synthesized with (AASB) and without (AAS) bentonite as an adsorbent material. The results indicated that the highest compressive strength (AAS = 92.89MPa and AASB = 94.57MPa) was observed in samples which were prepared by using a water glass modulus of 1.4, liquid-solid ratio of 0.26 and a curing temperature of 25 °C. The leaching concentrations of Pb and Zn in both methods (sulfuric and nitric acid, and TCLP) had not exceeded the toxicity limits up to 70% addition of LZSS due to a higher compressive strength (>60 MPa) of AAS and AASB samples. While, leaching concentrations in AASB samples were lower than AAS. Conclusively, it was found that the solidification effect depends upon the composition of binder material, type of leaching extractant, nature and concentration of heavy metals in waste. The XRD, FTIR and SEM analyses confirmed that the solidification mechanism was carried out by both physical encapsulation and chemical fixation (dissolved into a crystal structure). Additionally, bentonite as an auxiliary additive significantly improved the solidification/stabilization of LZSS in AASB by enhancing the chemical adsorption capacity of heavy metals.Keywords
This publication has 46 references indexed in Scilit:
- Solidification/stabilization of lead-zinc smelting slag in composite based geopolymerJournal of Cleaner Production, 2019
- Immobilization mechanism of Pb in fly ash-based geopolymerConstruction and Building Materials, 2017
- Immobilization potential of Cr(VI) in sodium hydroxide activated slag pastesJournal of Hazardous Materials, 2017
- Remediation of heavy metal(loid)s contaminated soils – To mobilize or to immobilize?Journal of Hazardous Materials, 2014
- Immobilisation of lead smelting slag within spent aluminate—fly ash based geopolymersJournal of Hazardous Materials, 2013
- Application of granulated lead–zinc slag in concrete as an opportunity to save natural resourcesRadiation Physics and Chemistry, 2013
- Chemical stabilization of metals and arsenic in contaminated soils using oxides – A reviewEnvironmental Pollution, 2013
- Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?Construction and Building Materials, 2012
- Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful productsJournal of Hazardous Materials, 2007
- Resistance of alkali-activated slag concrete to acid attackCement and Concrete Research, 2003