Analysis of a scanning pentaprism system for measurements of large flat mirrors
- 3 December 2007
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 46 (35) , 8466-8474
Abstract
The optical surface of a large optical flat can be measured using an autocollimator and scanning pentaprism system. The autocollimator measures the slope difference between a point on the mirror and a reference point. Such a system was built and previously operated at the University of Arizona. We discuss refinements that were made to the hardware, the alignment procedure, and the error analysis. The improved system was demonstrated with a flat mirror, which was measured to be flat to rms. The uncertainty in the measurement is only rms.
Keywords
This publication has 6 references indexed in Scilit:
- Measurement of a 2-meter flat using a pentaprism scanning systemOptical Engineering, 2007
- Optimal use of pentaprisms in highly accurate deflectometric scanningMeasurement Science and Technology, 2006
- ESAD shearing deflectometry: potentials for synchrotron beamline metrology2006
- Error minimization in high-accuracy scanning deflectometry2006
- Portable long trace profiler: Concept and solutionReview of Scientific Instruments, 2001
- The penta-prism LTP: A long-trace-profiler with stationary optical head and moving penta prisma)Review of Scientific Instruments, 1995