Three-Dimensional Integrated Fan-Out Wafer-Level Package Micro-Bump Electromigration Study
Open Access
- 15 June 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (6) , 1255
Abstract
To meet the demands for miniaturization and multi-functional and high-performance electronics applications, the semiconductor industry has shifted its packaging approach to multi-chip vertical stacking. Among the advanced packaging technologies for high-density interconnects, the most persistent factor affecting their reliability is the electromigration (EM) problem on the micro-bump. The operating temperature and the operating current density are the main factors affecting the EM phenomenon. Therefore, when a micro-bump structure is in the electrothermal environment, the EM failure mechanism of the high-density integrated packaging structure must be studied. To investigate the relationship between loading conditions and EM failure time in micro-bump structures, this study established an equivalent model of the vertical stacking structure of fan-out wafer-level packages. Then, the electrothermal interaction theory was used to carry out numerical simulations in an electrothermal environment. Finally, the MTTF equation was invoked, with Sn63Pb37 as the bump material, and the relationship between the operating environment and EM lifetime was investigated. The results showed that the current aggregation was the location where the bump structure was most susceptible to EM failure. The accelerating effect of the temperature on the EM failure time was more obvious at a current density of 3.5 A/cm2, which was 27.51% shorter than 4.5 A/cm2 at the same temperature difference. When the current density exceeded 4.5 A/cm2, the change in the failure time was not obvious, and the maximum critical value of the micro-bump failure was 4 A/cm2~4.5 A/cm2.Keywords
Funding Information
- China Postdoctoral Science Foundation (2022M712975)
This publication has 33 references indexed in Scilit:
- Formation mechanism of a cathodic serrated interface and voids under high current densityMaterials Letters, 2018
- Effects of Electrical Current and External Stress on the Electromigration of Intermetallic Compounds Between the Flip-Chip Solder and Copper SubstrateJournal of Electronic Materials, 2017
- Degradation behaviors of micro ball grid array (μBGA) solder joints under the coupled effects of electromigration and thermal stressJournal of Materials Science: Materials in Electronics, 2016
- Microelectronics packaging technology roadmaps, assembly reliability, and prognosticsFacta universitatis - series: Electronics and Energetics, 2016
- Transition from flip chip solder joint to 3D IC microbump: Its effect on microstructure anisotropyMicroelectronics Reliability, 2013
- Thermomigration in solder jointsMaterials Science and Engineering: R: Reports, 2012
- Effects of Surface Finishes and Current Stressing on Interfacial Reaction Characteristics of Sn-3.0Ag-0.5Cu Solder BumpsJournal of Electronic Materials, 2012
- Electromigration and Thermomigration in Pb-Free Flip-Chip Solder JointsAnnual Review of Materials Research, 2010
- Electromigration induced strain field simulations for nanoelectronics lead-free solder jointsInternational Journal of Solids and Structures, 2007
- Threshold current density of electromigration in eutectic SnPb solderApplied Physics Letters, 2005