Defect evolution of 409L stainless steel in high-speed TIG welding
Authors:
- 6 January 2020
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 35 (2) , 179-186
Abstract
The undercut and humping weld defects in high-speed tungsten inert gas (TIG) welding deteriorate the mechanical properties of the weld, which limit the improvement of modern manufacturing. Based on the heat and mass transfer in the molten pool, the geometry of the molten pool and depression region and the maximum backward velocity of the lateral channel were emphatically analyzed as the heat input being retained to be basically consistent at different welding speeds. As the welding speed increases from 1.0 m/min to 3.0 m/min, the maximum backward velocity of the lateral channel increases from 0.31 m/s to 0.57 m/s, which aggravates the undercut defect. The undercut defect initially appears in the weld at 1.5 m/min and becomes more serious with increasing welding speed. Additionally, the length of the depression region of the molten pool shows an increasing trend. The humping weld defects are first observed in the weld at 2.8 m/min, and the length of the depression region exceeds 3.6 mm. These findings prove the complicated behavior in the molten pool due to the complex thermo-mechanical coupling effect, and also provide a possibility to obtain sound welds efficiently by selecting suitable welding parameters in high-speed TIG welding process.Keywords
This publication has 28 references indexed in Scilit:
- Effect of welding speed on microstructures, mechanical properties and corrosion behavior of GTA-welded AISI 201 stainless steel sheetsJournal of Materials Processing Technology, 2014
- Numerical and experimental study of arc and weld pool behaviour for pulsed current GTA weldingInternational Journal of Heat and Mass Transfer, 2011
- Thermal Science of Weld Bead Defects: A ReviewJournal of Heat Transfer, 2010
- Arc characteristics and behaviour of metal transfer in pulsed current GMA welding of stainless steelJournal of Materials Processing Technology, 2009
- Understanding Bead Hump Formation in Gas Metal Arc Welding Using a Numerical SimulationMetallurgical and Materials Transactions B, 2007
- High speed fusion weld bead defectsScience and Technology of Welding and Joining, 2006
- Humping mechanisms present in high speed weldingScience and Technology of Welding and Joining, 2006
- The humping phenomenon during high speed gas metal arc weldingScience and Technology of Welding and Joining, 2005
- Heat transfer and fluid flow in a partially or fully penetrated weld pool in gas tungsten arc weldingInternational Journal of Heat and Mass Transfer, 2001
- Factors affecting variable weld penetrationInternational Materials Reviews, 1990