The Influence of Pre- and Post-Heat Treatment on Mechanical Properties and Microstructures in Friction Stir Welding of Dissimilar Age-Hardenable Aluminum Alloys
Open Access
Abstract
An Al-Mg-Si alloy 6061 and an Al-Zn-Mg alloy 7A52 were joined by friction stir welding successfully. Pre- and post- heat treatment were employed to improve the strength of the weld. The results show a best weld joint with the lowest hardness of 100 HV in 6061 matrix, being achieved by post-solid-solution and subsequent two-stage artificial aging for the whole weld joint of the 7A52 and 6061 solid solution. Under this condition, the weld nugget zone (WNZ) is stronger than 6061 matrix but it has lower hardness than 7A52 matrix. The hardness of WNZ is contributed by the combination of η′ and L precipitates, dynamically changes along with the ratios between the number of η′ and L precipitates. The higher the number density of η′ precipitates, the hardness of WNZ is closer to that of the 7A52 matrix. Otherwise, the higher number density of L precipitates, the hardness of WNZ is closer to that of 6061 matrix. The coexistence of η′ and L precipitates is a direct result from the mixture of 7A52 and 6061 alloys achieved by stirring. Precipitates identification and composition analysis reveal a dynamic WNZ with constituent transition in hardness and composition.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (No. 2017YFA0204403)
- National Natural Science Foundation of China (No. 51301064)
- Fundamental Research Funds for the Central Universities (No. 30918011341)
- State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body at Hunan University (No. 31715009)
This publication has 38 references indexed in Scilit:
- Effect of post weld heat treatments on microstructure and mechanical properties of friction stir welded joints of Al–Zn–Mg alloy AA7039Materials & Design (1980-2015), 2013
- The microstructure and mechanical properties of friction stir welded Al–Zn–Mg alloy in as welded and heat treated conditionsMaterials & Design (1980-2015), 2011
- Revisiting the precipitation sequence in Al–Zn–Mg-based alloys by high-resolution transmission electron microscopyScripta Materialia, 2010
- Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plateMaterials Science and Engineering: A, 2008
- Friction stir welding of dissimilar AA2024 and AA7075 aluminum alloysMaterials Science and Engineering: B, 2008
- Hundred years of precipitation hardeningJournal of Light Metals, 2001
- HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al–Zn–Mg alloysActa Materialia, 1999
- Pre-precipitate clusters and precipitation processes in Al–Mg–Si alloysActa Materialia, 1999
- Effects of friction stir welding on microstructure of 7075 aluminumScripta Materialia, 1997
- Precipitation and Strengthening in Aluminium AlloysMaterials Science Forum, 1996