Modifying of etching anisotropy of silicon substrates by surface active agents
Authors:
Open Access
- 20 February 2011
- journal article
- research article
- Published by Walter de Gruyter GmbH in Open Physics
- Vol. 9 (2) , 410-416
Abstract
The influence of alcohol additives on etch rate anisotropy of Si(hkl) planes has been studied. The etching processes were carried out in 3 and 5 M KOH aqueous solutions saturated and non-saturated with alcohols. Isopropanol, 1-propanol and tert-butanol were examined. It has been showed that the etching process cannot be controlled only by the surface tension of the solution. Saturation of the etching solution with alcohols modifies etch rate anisotropy, lowering the ratio of the etch rate of (110) and vicinal planes to the etch rate of (100) plane. The morphology of Si(hkl) planes etched in 3 M KOH solution saturated with tert-butyl alcohol has been studied in detail. Smooth (331) and (221) planes have been achieved in this solution. The (100) plane turned out to be densely covered by hillocks, opposite to the (100) plane etched in weak-alkaline solution saturated with isopropanol. To explain this phenomenon, the mechanism of hillocks formation on Si(100) surface has been proposed.Keywords
This publication has 10 references indexed in Scilit:
- Analysis of Interaction of Surfactant Molecules with Si(hkl) Planes on the Basis of Anisotropic Etching in Alkaline SolutionsActa Physica Polonica A, 2009
- Orientation- and concentration-dependent surfactant adsorption on silicon in aqueous alkaline solutions: explaining the changes in the etch rate, roughness and undercutting for MEMS applicationsJournal of Micromechanics and Microengineering, 2009
- Surfactant Adsorption on Single-Crystal Silicon Surfaces in TMAH Solution: Orientation-Dependent Adsorption Detected by In Situ Infrared SpectroscopyJournal of Microelectromechanical Systems, 2009
- Specific features of etching of the (001) surface of single-crystalline silicon in KOH-based solutionsRussian Journal of General Chemistry, 2007
- Surface termination and hydrogen bubble adhesion on Si(100) surfaces during anisotropic dissolution in aqueous KOHJournal of Electroanalytical Chemistry, 2006
- The role of Triton surfactant in anisotropic etching of {1 1 0} reflective planes on (1 0 0) siliconJournal of Micromechanics and Microengineering, 2005
- Etch rates and morphology of silicon (h k l) surfaces etched in KOH and KOH saturated with isopropanol solutionsSensors and Actuators A: Physical, 2004
- The effect of alcohol additives on etching characteristics in KOH solutionsSensors and Actuators A: Physical, 2002
- The effect of isopropyl alcohol on etching rate and roughness of (1 0 0) Si surface etched in KOH and TMAH solutionsSensors and Actuators A: Physical, 2001
- Formation and stabilization of pyramidal etch hillocks on silicon {100} in anisotropic etchants: Experiments and Monte Carlo simulationJournal of Applied Physics, 2001