The Microstructure and Selected Mechanical Properties of Al2O3 + 13 wt % TiO2 Plasma Sprayed Coatings

Authors:
Open Access
Publisher website
Google Scholar
Abstract
The Al2O3 + TiO2 coatings are of the interest of surface technology and tribology due to their good wear resistance and enhanced toughness comparing to pure Al2O3 coatings. However, the detailed effect of the used feedstock powder, is often neglected. Here, this work focuses on the deposition of Al2O3 + 13 wt % TiO2 coatings by atmospheric plasma spraying (APS) method as well as on their microstructure, phase composition and selected mechanical properties, in the reference to the route of the powder feedstock preparation. The commercial powder Metco 6221 in agglomerated and sintered form was used as a feedstock material during spraying, due to the fact that, so far, sintered or cladded powders are the most studied ones. The 2k + 1 spray experiment allowed to evaluate the influence of two variables, namely spray distance and torch linear velocity, on the coating microstructure. Afterwards, the coating adhesion was measured by the means of pull-off test. The correlations between Vickers microhardness, fracture toughness (Kc) as well as the coating morphology and phase composition were investigated. Finally, the dry sliding wear resistance was studied by using Ball-on-Disc method.

This publication has 33 references indexed in Scilit: