Structure, Sintering, and Crystallization Kinetics of Alkaline‐Earth Aluminosilicate Glass–Ceramic Sealants for Solid Oxide Fuel Cells
- 26 February 2010
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 93 (3) , 830-837
Abstract
The most common approach to seal an electrolyte or a ceramic anode with a metallic interconnect in solid oxide fuel cells of planar configuration (pSOFC), in order to achieve a hermetic and stable cell, is to use rigid glass or glass–ceramic (GC) seals. The properties of these sealants can be tailored specifically for use in SOFCs through variation of the glass composition. In the present manuscript, we aim to study the structure, sintering behavior, and crystallization kinetics of a new series of aluminosilicate GC sealants derived from substitution via scheme 0.1(Ca 2+ +Si 4+ )↔0.1(La 3+ +Al 3+ ) in a pure CaMgSi 2 O 6 (diopside) system. The substitution of BaO for CaO and the addition of fixed amounts of B 2 O 3 , Cr 2 O 3 , and NiO were attempted in order to achieve desirable traits that qualify the investigated GCs for sealing application in pSOFCs. The investigated glasses showed a steady increase in density, coefficient of thermal expansion, and molar volume with addition of Cr 2 O 3 and increasing BaO contents while no significant variation in glass transition temperature ( T g ) was observed. Sintering and crystallization behavior of the glasses were investigated using hot‐stage microscopy and differential thermal analysis, respectively. The microstructure and the properties of GCs were investigated under nonisothermal heat treatment conditions (800° and 850°C; 1 h). Finally, Rietveld–R.I.R. technique was used to quantify the amount of crystalline and amorphous content in the GCs. It was observed that while addition of Cr 2 O 3 improved the sinterability of glass‐powder compacts and decreased the amorphous content in the resultant GCs, substitution of BaO for CaO led to an increase in amorphous content in the GCs.Keywords
This publication has 26 references indexed in Scilit:
- Electrical behavior of aluminosilicate glass-ceramic sealants and their interaction with metallic solid oxide fuel cell interconnectsJournal of Power Sources, 2010
- Optimization of La2O3-containing diopside based glass-ceramic sealants for fuel cell applicationsJournal of Power Sources, 2009
- Sintering behaviour of 45S5 bioactive glassActa Biomaterialia, 2008
- Isothermal Crystallization of a Solid Oxide Fuel Cell Sealing Glass by Differential Thermal AnalysisJournal of the American Ceramic Society, 2008
- The effect of Cr2O3 addition on crystallization and properties of La2O3-containing diopside glass-ceramicsActa Materialia, 2008
- Synthesis and properties of a barium aluminosilicate solid oxide fuel cell glass–ceramic sealantJournal of Power Sources, 2008
- Influence of NiO on the crystallization kinetics of near stoichiometric cordierite glasses nucleated with TiO2Journal of Physics: Condensed Matter, 2007
- Sealants for solid oxide fuel cellsJournal of Power Sources, 2005
- Sintering of glasses in the system RO–Al2O3–BaO–SiO2 (R=Ca, Mg, Zn) studied by hot-stage microscopySolid State Ionics, 2004
- Quantitative Determination of Crystalline and Amorphous Phase in Traditional Ceramics by Combined Rietveld-RIR MethodMaterials Science Forum, 1998