A Novel Loaded Tooth Contact Analysis Procedure With Application to Internal–External Straight Bevel Gear Mesh in a Pericyclic Drive
- 13 January 2021
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 143 (10) , 1-22
Abstract
A comprehensive numerical loaded tooth contact analysis (LTCA) model is proposed for straight bevel gears that exhibit large number of teeth in contact, well beyond the involute line of action limits. This kind of contact is observed when the meshing gears have conformal surfaces, as in a pericyclic mechanical transmission, and is traditionally analyzed using finite element simulations. The pericyclic drive is kinematically similar to an epicyclic bevel gear train and is characterized by load sharing over large number of teeth in an internal–external bevel gear mesh, large shaft angles (175–178 deg), nutational gear motion, and high reduction ratio. The contact region spreads over a large area on the gear tooth flank due to high contacting surface conformity. Thus, a thick plate finite strip method (FSM) was utilized to accurately calculate the gear tooth bending deflection. Based on the tooth deformation calculation model and accounting for initial surface separation, a variational framework is developed to simultaneously solve for load distribution and gear tooth deformation. This is followed by calculation of contact stress, bending stress, mesh stiffness, and transmission error. The results demonstrate the high-power density capabilities of the pericyclic drive and potential for gear noise reduction. The model developed herein is applied with real gear tooth surfaces, as well.Keywords
Funding Information
- Asian Pacific American Institute for Congressional Studies (W911W6-17-2-0003)
This publication has 18 references indexed in Scilit:
- Design analysis of Pericyclic Mechanical Transmission systemMechanism and Machine Theory, 2013
- Tooth geometry and bending stress analysis of conjugate meshing face-gear pairsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2012
- Elastohydrodynamic Lubrication Analysis of Conjugate Meshing Face Gear PairsJournal of the American Helicopter Society, 2012
- A load distribution model for hypoid gears using ease-off topography and shell theoryMechanism and Machine Theory, 2009
- Algorithms for analysis of meshing and contact of spiral bevel gearsMechanism and Machine Theory, 2007
- Similarity and Equivalence of Nutating Mechanisms to Bevel Epicyclic Gear Trains for Modeling and AnalysisJournal of Mechanical Design, 2005
- The internal bevel gear and its applicationsProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 1997
- A general formulation for the calculation of the load sharing and transmission error under load of spiral bevel and hypoid gearsMechanism and Machine Theory, 1995
- Low-noise, high-strength, spiral-bevel gears for helicopter transmissionsJournal of Propulsion and Power, 1994
- Linearization of multibody frictional contact problemsComputers & Structures, 1988