Abstract
The continued development of nuclear fuel technologies has highlighted the significance of Tristructural Isotropic (TRISO) coated particles, particularly for High-Temperature Gas-cooled Reactors (HTGRs) due to their exceptional thermal and radiation tolerance. However, quantitative data on layer-specific mechanical behavior of TRISO coatings, especially under irradiation and elevated temperature conditions are lacking. This study investigates the micro-tensile response of the buffer, inner pyrolytic carbon (IPyC) layers, and their interfacial regions, in AGR-2 irradiated TRISO-coated particles across three irradiation conditions spanning a range of time-average volume-average (TAVA) irradiation temperatures, neutron fluences, and burnups. Post-irradiation, room-temperature micro-tensile testing was employed to enable site-specific mechanical evaluation of both fresh and neutron-irradiated samples. The results indicate that irradiation temperature plays a significant role in governing the mechanical response of each layer, although the underlying mechanisms differ markedly. Both the IPyC and buffer layers exhibit a monotonic decrease in ultimate tensile strength with increasing temperature. In the IPyC layer, this behavior is attributed to irradiation-induced turbostratic ordering, with the degree of ordering increasing with temperature at the sub-micrometer to nanometer scale, which reduces intrinsic load-bearing capacity without substantially reshaping the flaw population, reflected in relatively stable Weibull moduli among irradiated compacts. In contrast, the buffer layer's strength reduction is driven by micrometer-scale pore coarsening and coalescence competing with densification, which fundamentally restructures the flaw population and produces very low Weibull moduli.

This publication has 22 references indexed in Scilit: