Micro‐mechanical deformation mechanisms in the fracture of hybrid‐particulate composites based on glass beads, rubber and epoxies
- 1 December 2000
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 40 (12) , 2457-2470
Abstract
Two tougheners, glass beads and carboxyl terminated butadiene acrylonitrile copolymer (CTBN), are used to toughen and stiffen an epoxy thermoset. Rubber‐encapsulated glass beads are used and the hybrid particulate composites containing them are compared with those containing non‐encapsulated glass beads. Within a certain range of composition, the rubber encapsulation is found to change the interactions between glass beads and CTBN particles, resulting in an increase in fracture toughness. The toughening effect is explained by the fact that the cavities of CTBN particles are larger in encapsulation systems than in non‐encapsulation systems. As more CTBN particles are incorporated into glass bead filled epoxies, the cavitation/shear yielding mechanism of CTBN particles replaces the micro‐shear banding mechanism of glass beads as the major micro‐mechanical deformation. Rubber encapsulation seems to enable this transition of major micro‐mechanical deformation to occur at a lower volume fraction of CTBN.Keywords
This publication has 32 references indexed in Scilit:
- Fracture behaviour of unmodified and rubber-modified epoxies under hydrostatic pressureJournal of Materials Science, 1994
- High-rate fracture toughness of polypropylene-based, hybrid, particulate compositesJournal of Materials Science, 1994
- The importance of constraint relief caused by rubber cavitation in the toughening of epoxyJournal of Materials Science, 1993
- Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxiesJournal of Materials Science, 1991
- Ternary composites of polypropylene, elastomer, and filler: Analysis of phase structure formationPolymer Composites, 1990
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1989
- Infrared analysis and Izod impact testing of multicomponent polymer composites: polyethylene/ EP D M /filler systemsJournal of Materials Science, 1987
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- The use of chemical contrast in the SEM analysis of polymer blendsJournal of Polymer Science: Polymer Physics Edition, 1982