Eliminating sharkskin distortion in polyethylene extrusion via a molecular route
- 1 July 2011
- journal article
- Published by Society of Rheology in Journal of Rheology
- Vol. 55 (4) , 855-873
Abstract
This study examines the linear viscoelastic properties and processing of blends of a metallocene polyethylene with different ultrahigh molecular weight polyethylenes (UHMWPEs). Blend compositions were prepared such that they were below and above the UHMWPE coil overlap concentration, c*. Linear rheology and processing were found to be very sensitive to molecular weight and concentration, suggesting an effective macromolecular network threshold. The linear viscoelastic behavior of the blends could be described using a simple model based on reptation, implying a segmental interaction of the macromolecules. Extrusion flow curves were identical for the pure material and blends. However, for a given blend composition, the amplitude of the sharkskin distortion diminished as the UHMWPE molecular weight in the blend increased, and completely vanished at a value corresponding to the coil overlap condition. For a given molecular weight of the UHMWPE, it was also possible to obtain distortion free extrudates simply by maintaining the UHMWPE concentration above the corresponding c*. © 2011 The Society of Rheology, Inc.Peer RevieweKeywords
This publication has 59 references indexed in Scilit:
- Some applications of molecular rheology: Polymer formulation and molecular designJournal of Non-Newtonian Fluid Mechanics, 2005
- The effect of die exit curvature, die surface roughness and a fluoropolymer additive on sharkskin extrusion instabilities in polyethylene processingJournal of Non-Newtonian Fluid Mechanics, 2005
- Ethylene/styrene copolymerisation by homogeneous metallocene catalysts: experimental and molecular simulations using rac-ethylenebis(tetrahydroindenyl)MCl2 [M=Ti,Zr] systemsPolymer, 2004
- Triple-detector GPC characterization and processing behavior of long-chain-branched polyethylene prepared by solution polymerization with constrained geometry catalystPolymer, 2004
- The correlation of experimental surface extrusion instabilities with numerically predicted exit surface stress concentrations and melt strength for linear low density polyethyleneJournal of Rheology, 2000
- The effect of chain architecture on “sharkskin” of metallocene polyethylenesMacromolecular Rapid Communications, 2000
- Blends of linear and branched polyethylenesPolymer Engineering & Science, 2000
- Rheology of metallocene‐catalyzed monomodal and bimodal polyethylenesPolymer Engineering & Science, 1999
- Molecular instabilities in capillary flow of polymer melts: Interfacial stick‐slip transition, wall slip and extrudate distortionMacromolecular Chemistry and Physics, 1997
- Melt rheological and thermodynamic properties of polyethylene homopolymers and poly(ethylene/?-olefin) copolymers with respect to molecular composition and structureJournal of Applied Polymer Science, 1996