Influence of Aging Prior to Extrusion on the Microstructure and Mechanical Properties of an Extruded AZ91 Alloy
- 1 April 2020
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (7)
Abstract
Herein, aging prior to extrusion is used to regulate the microstructure and mechanical properties of an extruded AZ91 alloys. The results show that pre‐aging can induce numerous precipitates in Mg matrix to refine the recrystallized microstructure during hot extrusion of AZ91 alloys. After extrusion, most precipitates distribute at grain boundaries, suppressing grain growth. Thus, coupling pre‐aging and hot extrusion can effectively enhance the yield strength of the AZ91 alloy and maintain considerable plasticity (>15%) simultaneously. In contrast, the improvement in mechanical properties is not so effective by direct extrusion and subsequent heat treatment. Although the subsequent aging (T6 treatment) can induce dense precipitates inside grains generating strong precipitation hardening, it badly reduce the tensile ductility (to 6.3%) as well. Moreover, the T6 treated sample also exhibits lower yield strength compared with the extruded sample via coupling pre‐aging and hot extrusion. Based on the experimental analyses, the underline mechanisms are discussed.Keywords
Funding Information
- National Natural Science Foundation of China (51871036, 51571045, 51421001)
This publication has 35 references indexed in Scilit:
- Effect of Y‐Element on Microstructure and Mechanical Properties of As‐Cast Mg–3Zn–1Mn Alloy Containing I and W PhaseAdvanced Engineering Materials, 2019
- Enhanced Performance of Mg–Zn–Y–Mn Alloy via Minor Ca AdditionAdvanced Engineering Materials, 2019
- Effect of Rotary Swaging on Microstructure, Texture, and Mechanical Properties of a Mg‐Al‐Zn AlloyAdvanced Engineering Materials, 2019
- Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatmentJournal of Alloys and Compounds, 2019
- Effect of graphene nanoplatelets content on the microstructural and mechanical properties of AZ80 magnesium alloyMaterials Science and Engineering: A, 2019
- Fabrication of high-strength Mg-Y-Sm-Zn-Zr alloy by conventional hot extrusion and agingMaterials Science and Engineering: A, 2018
- High strength Mg-9Al serial alloy processed by slow extrusionMaterials Science and Engineering: A, 2017
- Enhanced fatigue properties of cast AZ80 Mg alloy processed by cyclic torsion and low-temperature annealingMaterials Science and Engineering: A, 2017
- Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAPMaterials Science and Engineering: A, 2016
- Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain ratesActa Materialia, 2010