Enhancement of hydrogen production via methanol steam reforming using a Ni-based catalyst supported by spongy mesoporous alumina
- 23 March 2024
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (9) , 5485-5498
Abstract
In situ methanol steam reforming for hydrogen production is a promising technology to provide a hydrogen source for full cells. However, the conventional methanol steam reforming usually encounters catalyst inefficiency and instability, which make its industrial application difficult. This work proposes a novel and stable Ni-based catalyst supported by spongy mesoporous alumina and achieves an enhancement of hydrogen production. The prepared Ni/γ-Al2O3 catalyst exhibits a higher hydrogen production yield of 0.26 mol h−1 than the commercial Ni/γ-Al2O3-Com catalyst (0.21 mol h−1) at 450 °C, with an improvement of the hydrogen flow rate of 23.8%. The Ni/γ-Al2O3 catalyst also presents a much superior performance to the reported noble metal-based catalysts and Ni-based catalysts. The special spongy mesoporous structure provides favorable conditions for high catalytic activity, mainly based on the high dispersion of the Ni metal site and the high catalyst stability. The Ni metal particles are highly dispersed over spongy mesoporous Al2O3 with an average particle size of only 3.7 nm. Characterization analysis shows that the spongy mesoporous structure of the catalyst enables quick adsorption of the reactants and reaction intermediates, and the highly dispersed Ni metal site can lead to the rapid dehydrogenation of methanol to increase the hydrogen yield. Moreover, the stability of the prepared Ni/γ-Al2O3-5H catalyst is much superior to that of the commercial Ni/γ-Al2O3-Com catalyst, where Ni/γ-Al2O3-5H retained 100% of methanol conversion for 12 h, and the spongy mesoporous structure and the high dispersion of Ni particles were also well maintained. In addition, the reaction mechanism of methanol steam reforming over the Ni/γ-Al2O3-5H catalyst is revealed in detail, especially based on the in situ DRIFTS characterization results. This research provides valuable insights for the development of catalytic methanol steam reforming for hydrogen production and in the field of green chemistry.Keywords
Funding Information
- National Natural Science Foundation of China (22178340)
- China Association for Science and Technology (2022QNRC001)
- Natural Science Foundation of Guangdong Province (2023A1515030159)
This publication has 57 references indexed in Scilit:
- Sorption enhanced steam reforming of methanol for high-purity hydrogen production over Cu-MgO/Al2O3 bifunctional catalystsApplied Catalysis B: Environment and Energy, 2020
- Bimetallic Ni-Co/SBA-15 catalysts prepared by urea co-precipitation for dry reforming of methaneApplied Catalysis A: General, 2018
- KOH-promoted Pt/Al2O3 catalysts for water gas shift and methanol steam reforming: An operando DRIFTS-MS studyApplied Catalysis B: Environment and Energy, 2017
- Development of nano Ni x Mg y O solid solutions with outstanding anti-carbon deposition capability for the steam reforming of methanolApplied Catalysis B: Environment and Energy, 2016
- Stabilized ordered-mesoporous Co3O4 structures using Al pillar for the superior CO hydrogenation activity to hydrocarbonsApplied Catalysis B: Environment and Energy, 2016
- A study of Ni/Al2O3 and Ni–La/Al2O3 catalysts for the steam reforming of ethanol and phenolApplied Catalysis B: Environment and Energy, 2015
- Ni–Al2O3 catalysts prepared by solution combustion method for syngas methanationCatalysis Communications, 2012
- Hydrogen production by methanol steam reforming on NiSn/MgO–Al2O3 catalysts: The role of MgO additionApplied Catalysis A: General, 2011
- Catalysts for methanol steam reforming—A reviewApplied Catalysis B: Environment and Energy, 2010
- Hydrogen production by ethanol steam reforming over Cu-Ni/SBA-15 supported catalysts prepared by direct synthesis and impregnationApplied Catalysis A: General, 2007