Control of visible-range transmission and reflection haze by varying pattern size, shape and depth in flexible metasurfaces
Authors:
Open Access
- 30 July 2024
- journal article
- research article
- Published by Higher Education Press in Frontiers of Optoelectronics
- Vol. 17 (1) , 1-18
Abstract
Cost-effective soft imprint lithography technique is used to prepare flexible thin polymeric surfaces containing a periodic arrangement of nanodimples and nanobumps of sub-micron size. Using a single master mold of self-assembled colloidal crystal, metasurfaces with different depths and heights of patterns with a fixed pitch are possible, which makes the process inexpensive and simple. These metasurfaces are studied for their diffuse and total transmission and reflection spectra in the visible range. The transmission haze and reflection haze are calculated from the measurements. The surface containing nanobumps of lesser pattern height result in higher values of reflection and transmission haze than from surfaces containing nanodimples of much higher depth for the same pitch. The haze is more dependent on the pattern depth or height and less dependent on the pitch of the pattern. Far-field transmission profiles measured in the same wavelength range from the patterned surfaces show that the scattering increases with the increase of the ratio of pattern depth/height to pitch, similar to the haze measurements conducted with a closed integrating sphere. These profiles show that the angular spread of scattered light in transmission is within 10°, explaining the reason for the relatively low transmission haze in all the patterned surfaces. Simulation results confirm that the nanobump pattern gives higher transmission haze compared to nanodimple pattern. By controlling the ratio of pattern depth/height to pitch of the features on these surfaces, both an increase in optical haze and a balance between total reflection intensity and total transmission intensity can be achieved. Graphical AbstractKeywords
This publication has 41 references indexed in Scilit:
- Diffractive metasurfaces with opposite curvatures of unit cellsOptics & Laser Technology, 2023
- Flexible and Tunable Dielectric Color Meta-hologramPlasmonics, 2019
- Moth-eye Structured Polydimethylsiloxane Films for High-Efficiency Perovskite Solar CellsNano-Micro Letters, 2019
- Hierarchical Design of Metal Micro/Nanohole Array Films Optimizes Transparency and Haze FactorAdvanced Functional Materials, 2018
- GaN Metalens for Pixel-Level Full-Color Routing at Visible LightNano Letters, 2017
- Enhancement of Light Absorption in Photovoltaic Devices using Textured Polydimethylsiloxane StickersACS Applied Materials & Interfaces, 2017
- Electrically Tunable Metasurface Perfect Absorbers for Ultrathin Mid-Infrared Optical ModulatorsNano Letters, 2014
- Dielectric Meta-Reflectarray for Broadband Linear Polarization Conversion and Optical Vortex GenerationNano Letters, 2014
- Fabrication of Ordered Nanostructured Arrays Using Poly(dimethylsiloxane) Replica Molds Based on Three‐Dimensional Colloidal CrystalsAdvanced Functional Materials, 2009
- Inward-Growing Self-Assembly of Colloidal Crystal Films on Horizontal SubstratesLangmuir, 2005