Computational Modelling of the Structural Integrity following Mass-Loss in Polymeric Charred Cellular Solids
Authors:
Open Access
- 27 October 2014
- journal article
- research article
- Published by Hindawi Limited in Journal of Computational Engineering
- Vol. 2014, 1-15
Abstract
A novel computational technique is presented for embedding mass-loss due to burning into the ANSYS finite element modelling code. The approaches employ a range of computational modelling methods in order to provide more complete theoretical treatment of thermoelasticity absent from the literature for over six decades. Techniques are employed to evaluate structural integrity (namely, elastic moduli, Poisson’s ratios, and compressive brittle strength) of honeycomb systems known to approximate three-dimensional cellular chars. That is, reducing the mass of diagonal ribs and both diagonal-plus-vertical ribs simultaneously show rapid decreases in the structural integrity of both conventional and reentrant (auxetic, i.e., possessing a negative Poisson’s ratio) honeycombs. On the other hand, reducing only the vertical ribs shows initially modest reductions in such properties, followed by catastrophic failure of the material system. Calculations of thermal stress distributions indicate that in all cases the total stress is reduced in reentrant (auxetic) cellular solids. This indicates that conventional cellular solids are expected to fail before their auxetic counterparts. Furthermore, both analytical and FE modelling predictions of the brittle crush strength of both auxteic and conventional cellular solids show a relationship with structural stiffness.Keywords
This publication has 16 references indexed in Scilit:
- Fire-resistive performance of intumescent flame-retardant coatings for steelMaterials & Design (1980-2015), 2012
- Medium-density ablative composites: processing, characterisation and thermal response under moderate atmospheric re-entry heating conditionsJournal of Materials Science, 2011
- A study on the rate of degradation of the bioabsorbable polymer polyglycolic acid (PGA)Journal of Materials Science, 2006
- Complex Char Formation in Flame-Retarded Fiber/Intumescent Combinations: Physical and Chemical Nature of Char1Textile Research Journal, 1999
- Elastoplastic Micromechanical Modeling of Two-Dimensional Irregular Convex and Nonconvex (Re-entrant) Hexagonal FoamsJournal of Applied Mechanics, 1998
- The effects of cell face curvature and corrugations on the stiffness and strength of metallic foamsActa Materialia, 1998
- The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solidsInternational Journal of Mechanical Sciences, 1997
- Models for the elastic deformation of honeycombsComposite Structures, 1996
- Molecular network designNature, 1991
- The mechanics of two-dimensional cellular materialsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1982