Process Development for Printing Copper Conductible Ink on Flexible Substrates using Aerosol Jet Printing Technology
Authors:
- 1 June 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1073-1084
Abstract
Rise in demand for wearable consumer electronics products has given an impetus to the development of flexible electronics technology encompassing flexible substrates and compatible circuitry. Also, additive manufacturing of flexible electronics is emerging rapidly via several techniques such as Inkjet and Aerosol Jet Printing (AJP). The basic component of all flexible circuits to be printed by these technologies is conductible ink, which is generally silver ink. Few studies exist on the printing of copper conductible ink and not many copper ink formulations are available in the market as that of silver inks. This study aims to develop a process development study for deposition of copper conductible lines on flexible substrates using the aerosol jet printing technology. The process development study includes investigation of photosintering parameters for obtaining desirable electrical resistance and shear load to failure values for the printed line. Different pre-drying techniques such as oven pre-drying and platen pre-drying have been used for improving the electrical and mechanical properties of the conductive traces. Techniques such as optical microscopy and white light interferometry have been used for the characterization of print quality of the conductible lines.Keywords
This publication has 11 references indexed in Scilit:
- Sintering Copper Nanoparticles with Photonic Additive for Printed Conductive Patterns by Intense Pulsed LightNanomaterials, 2019
- A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturingThe International Journal of Advanced Manufacturing Technology, 2019
- Factors Influencing the Line Consistency of Commonly Used Geometries for Additively Printed Electronics2019
- Green laser sintering of copper oxide (CuO) nano particle (NP) film to form Cu conductive linesAIP Advances, 2018
- Principles of aerosol jet printingFlexible and Printed Electronics, 2018
- All-photonic drying and sintering process via flash white light combined with deep-UV and near-infrared irradiation for highly conductive copper nano-inkScientific Reports, 2016
- Low-Thermal-Budget Photonic Processing of Highly Conductive Cu Interconnects Based on CuO Nanoinks: Potential for Flexible Printed ElectronicsACS Applied Materials & Interfaces, 2016
- Direct Intense Pulsed Light Sintering of Inkjet-Printed Copper Oxide Layers within Six MillisecondsACS Applied Materials & Interfaces, 2014
- Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver LinesACS Applied Materials & Interfaces, 2013
- A Review on Aerosol-Based Direct-Write and Its Applications for MicroelectronicsJournal of Nanotechnology, 2012