Plausible Differences between the Laboratory and Prototype Behaviors of Spillway Aerator Flows
Open Access
Abstract
An aerator, installed to prevent cavitation damages in spillways and outlet works, generates a typical two-phase flow affected by its configuration and flow conditions. The major parameters of concern include air demand, jet trajectory and streamwise changes of air concentration near chute bottom. This study reviews the theoretical basis and deals with several aspects of physical scale modeling, supported exclusively by field measurements. Analyses reveal that the sub-atmospheric pressure generated in the air cavity should also be scaled in physical modeling, which is seldom the case in the laboratory environment. Thus, the conventional approach to upscale the air demand is controversial. With the data from both fields and laboratories, it is demonstrated that a direct conversion of air flow from model to prototype is justified only if the approach flow velocity in the model exceeds 7.0–7.5 m/s or the Reynolds number exceeds 1.58 × 106. Failing to meet this premise would bring about errors for prototype predictions; the error extent depends on both model scale and flow magnitude. In terms of cavity pressure drop, the prototype differs by a factor of less than 10 from its scale model with sufficient air supply. In a model, the air concentration along the chute bottom drops considerably within one to two trajectory lengths. The prototype differs from its model in such a way that the air concentration decay is much slower, with a higher level that is maintained over a longer distance downstream of the impact location. This study is intended to provide insight for laboratory studies and engineering design.Keywords
Funding Information
- the Vattenfall R&D and Swedish Hydropower Centre (SVC)
This publication has 17 references indexed in Scilit:
- Evolution of Pressure and Cavitation on Side Walls Affected by Lateral Divergence Angle and Opening of Radial GateJournal of Hydraulic Engineering, 2016
- CFD modeling of two-phase flow of a spillway chute aerator of large widthJournal of Applied Water Engineering and Research, 2015
- History and Significance of the Morton Number in Hydraulic EngineeringJournal of Hydraulic Engineering, 2014
- Two-phase air-water flows: Scale effects in physical modelingJournal of Hydrodynamics, 2014
- Scale effects in physical hydraulic engineering models By VALENTIN HELLER, Journal of Hydraulic Research, Vol. 49, No. 3 (2011), pp. 293–306Journal of Hydraulic Research, 2012
- Chute Aerators: Steep Deflectors and Cavity SubpressureJournal of Hydraulic Engineering, 2011
- Scale effects in physical hydraulic engineering modelsJournal of Hydraulic Research, 2011
- Chute Aerators. II: Hydraulic DesignJournal of Hydraulic Engineering, 2010
- Chute Aerators. I: Air Transport CharacteristicsJournal of Hydraulic Engineering, 2010
- Air transport in chute flowsInternational Journal of Multiphase Flow, 2005