Steady state characteristics of misaligned multiple axial groove water-lubricated journal bearing
Authors:
- 11 December 2014
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 229 (6) , 712-722
Abstract
This paper deals with the influence of misalignment on the static performance of bearings having three axial grooves that are equi-spaced in the circumferential direction. The lubricant (water) is supplied from one end of the bearing that flows both in axial and circumferential direction and exits from its other end. Effects of misalignment in both vertical and horizontal plane are numerically computed for groove angles 36° and 18° using the modified Reynolds equation and finite difference method. The influence of misalignment on the steady state characteristics such as load capacity, friction coefficient, and side leakage is analyzed for both the groove angles with different eccentricity ratios. The load capacity and the side leakage flow, which is slightly more for bearing with groove angle 18° when compared with 36° groove angle, increases with the degree of misalignment (DM). The friction coefficient is less for bearing with groove angle 18°, when compared with bearing with 36° groove angle. The friction coefficient decreases with increase in DM for vertical misalignment for both the bearings.Keywords
This publication has 10 references indexed in Scilit:
- Theoretical investigations on the performance of an externally adjustable fluid-film bearing including misalignment and turbulence effectsTribology International, 2009
- Stability of four-axial and six-axial grooved water-lubricated journal bearings under dynamic loadProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008
- Film pressure distribution in water-lubricated rubber journal bearingsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2005
- Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformationTribology International, 2004
- Analysis of water-lubricated journal bearings with multiple axial groovesProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2004
- An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing PerformancesJournal of Tribology, 2001
- Analysis of steady-state characteristics of misaligned hydrodynamic journal bearings with isotropic roughness effectTribology International, 2000
- Predicted Performance of a Tri-Taper Journal Bearing Including Turbulence and Misalignment EffectsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1995
- Effect of cavitation on the performance of a grooved misaligned journal bearingWear, 1989
- Analysis of Misaligned Grooved Journal BearingsJournal of Lubrication Technology, 1979