Investigation of Debris Removal Mechanism in Ultrasonic-Assisted Electrochemical Discharge Machining
- 1 June 2025
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (6) , 063505
Abstract
Electrochemical discharge machining (ECDM) is widely used for fabricating microfeatures on brittle and non-conducting materials such as glass; however, inadequate electrolyte replenishment and debris accumulation in deep microhole drilling (>300 μm) hinder its machining performance. Ultrasonic-assisted electrochemical discharge machining (UA-ECDM) has emerged to improve electrolyte circulation and debris evacuation, thereby enhancing the machining depth. This investigation explores the influence of ultrasonic tool vibration on electrolyte flow dynamics, debris removal, and machining performance through a combined numerical and experimental approach. A 3D numerical simulation was performed to analyze electrolyte flow velocity distribution and debris movement at various vibration amplitudes. The results indicate that ultrasonic vibration doubled the electrolyte velocity and increased the debris removal efficiency by 50%. The experimental observations confirmed that ultrasonic vibration increases hole depth by 33% and improves the aspect ratio by 16% compared to conventional ECDM. High-speed imaging, current-time signals, and EDS analysis revealed that UA-ECDM minimizes debris deposition and ensures uniform discharge distribution, reducing tool wear and improving process stability. Additionally, multiple high- aspect ratio (2.5) through-holes were fabricated in a 1.1 mm thick glass substrate using a multi-tip tool electrode in UA-ECDM.Keywords
This publication has 49 references indexed in Scilit:
- Mechanism and experimental study on electrochemical-assisted discharge plasma machining of glass microstructures by ultrasonic vibrating wire electrodeThe International Journal of Advanced Manufacturing Technology, 2025
- Research on a capacitive MEMS pressure sensor based on through glass viaMicrowave and Optical Technology Letters, 2023
- Study on electrochemical discharge machining of small holes array on glass with ultrasonic vibrating tube electrodeThe International Journal of Advanced Manufacturing Technology, 2023
- Al2O3-Based Ceramic Materials for LTCC Technology: An OverviewGlass and Ceramics, 2023
- Theoretical and experimental study on localization improvement in ultrasonic vibration–assisted spark-assisted electrochemical drilling processThe International Journal of Advanced Manufacturing Technology, 2022
- Fabrication of Through-glass Vias (TGV) based 3D microstructures in glass substrate by a lithography-free process for MEMS applicationsApplied Surface Science, 2022
- Experimental investigations and its dimensional analysis–based modeling of the UAECDM processThe International Journal of Advanced Manufacturing Technology, 2020
- Micro-drilling characteristics of sequential glass fiber-reinforced resin-based/copper foil multi-layer sheetsThe International Journal of Advanced Manufacturing Technology, 2020
- Laser-drilling formation of through-glass-via (TGV) on polymer-laminated glassJournal of Materials Science: Materials in Electronics, 2019
- Study of the current signal and material removal during ultrasonic-assisted electrochemical discharge machiningThe International Journal of Advanced Manufacturing Technology, 2017