Study of Carboxymethyl Cellulose from Papaya Peels as Binder in Ceramics
Authors:
- 12 January 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 93-94, 17-21
Abstract
Effects of carboxymethyl cellulose from papaya peel (CMCp) on the properties of ceramics were investigated. Cellulose was extracted from papaya peels by NaOH and then it was modified by chloro acetic acid to obtain carboxymethyl cellulose. The prepared CMCp was applied as a binder in ceramic slip in order to increase its viscosity. Sodium silicate was also added into the slip for providing a dispersion of slip and protecting the sedimentation of clay particles. Various concentrations of CMCp and commercial CMC (CMCc) (0.05, 0.1, 0.15, 0.2 and 0.25% w/w of dry weight of clays) were added into the slip. Effect of CMC on viscosity of the slip and the ceramic density were studied. The relationship between the ceramic properties such as, shrinkage, porosity, casting rate and bending strength (both green strength and fired strength), and CMC concentration was also observed. As increasing both CMCp and CMCc, viscosity increased while density decreased. The prepared ceramics (green ware and fired ware) added with CMCp were found to have higher strength and lower in %shrinkage than that of adding with CMCc. The thickness of the ceramic wall adding CMCc increased with increasing CMCc concentration, and time in contrast to that of CMCp as the thickness decreased with increasing CMCp concentration. However, the ceramics with addition of CMCp possessed higher strength than that of the commercial one.Keywords
This publication has 8 references indexed in Scilit:
- Optimization of reaction conditions for preparing carboxymethyl cellulose from sago wasteCarbohydrate Polymers, 2006
- A new CMC-AA resin/inorganic-gel super absorbent materialJournal of Wuhan University of Technology-Mater. Sci. Ed., 2006
- Synthesis and characterization of sodium carboxymethylcellulose from cavendish banana pseudo stem (Musa cavendishii LAMBERT)Carbohydrate Polymers, 2005
- Production of carboxymethyl cellulose from sugar beet pulp cellulose and rheological behaviour of carboxymethyl celluloseCarbohydrate Polymers, 2003
- Enhanced casting rate by dynamic heating during slip castingJournal of the European Ceramic Society, 2002
- Emulsifying Properties of Whey Protein‐Carboxymethylcellulose ComplexesJournal of Food Science, 2002
- Physico-chemical characterisation of carboxymethylated spun cellulose fibresBiomaterials, 2001
- Optimization of the rheological properties of alumina slurries for ceramic processing applications Part I: Slip-castingJournal of the European Ceramic Society, 2001