Evaluation of microhardness, surface roughness, and wear behavior of different types of resin composites polymerized with two different light sources
- 2 December 2009
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 92B (2) , 470-478
Abstract
The microhardness, surface roughness and wear resistance of different types of resin composites, polymerized by a Quartz Tungsten Halogen (QTH) or Light Emitting Diode (LED) light curing units (LCU) were evaluated in this in vitro study. Cylindrical blocks were prepared from composites (8 mm in diameter, and 2 mm in thickness) and polymerized by a LED or a QTH LCU. Vickers hardness was measured on the top and bottom surfaces of the specimens. Surface roughness was measured with a surface profilometer on the top of the specimens. For the wear test, specimens were tested in a conventional pin‐on‐disc tribology machine under 15 N loads. The statistical analyses were performed by one‐way analysis of variance (ANOVA) and t‐tests, including the Bonferroni correction. Nanocomposite material Clearfil Majesty™ Posterior showed the highest hardness values in all polymerization types at the top and bottom surfaces (p < 0.05). Microhybrid Clearfil™ APX and hybrid Quixfil™ composites demonstrated the greatest surface roughness. Wear resistance of Clearfil Majesty™ Posterior was found to be the highest among the other tested resin composites. The results indicated that Clearfil Majesty™ Posterior demonstrated higher microhardness, less surface roughness, and higher wear resistance when compared with the other tested materials for both polymerization types. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2010Keywords
This publication has 31 references indexed in Scilit:
- In vitro wear, surface roughness and hardness of propanal-containing and diacetyl-containing novel composites and copolymers based on bis-GMA analogsDental Materials, 2008
- How to qualify and validate wear simulation devices and methodsDental Materials, 2006
- Selected characteristics of an Ormocer and a conventional hybrid resin compositeDental Materials, 2004
- The effects of light intensity and method of exposure on the hardness of four light-cured dental restorative materialsInternational Dental Journal, 2003
- Effect of novel filler particles on the mechanical and wear properties of dental compositesDental Materials, 2002
- Effect of filler fraction and filler surface treatment on wear of microfilled compositesDental Materials, 2002
- Dental composite depth of cure with halogen and blue light emitting diode technologyBritish Dental Journal, 1999
- Correlation between depth of cure and surface hardness of a light‐activated resinEuropean Journal of Oral Sciences, 1993
- Materials Science Effect of Filler Content and Size on Properties of CompositesJournal of Dental Research, 1985
- Factors affecting the quantity of remaining double bonds in restorative resin polymersEuropean Journal of Oral Sciences, 1982