Tooth Surface Modification for Helical Gear Pairs considering Mesh Misalignment Tolerance
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Abstract
Mesh misalignment in mating the gear tooth surface is common and difficult to be determined accurately because of system deformation and bearing clearances, as well as manufacturing and assembly errors. It is not appropriate to consider the mesh misalignment as a constant value or even completely ignore it in the tooth surface modification design. Aiming to minimize the expectation and variance of static transmission error (STE) fluctuations in consideration of mesh misalignment tolerance, a multiobjective optimization model of tooth surface modification parameters is proposed through coupling the NSGA‐II algorithm and an efficient loaded tooth contact analysis (LTCA) model. The modified tooth flank of helical gear pairs is defined using 6 design variables which are related to profile modification, lead modification, and bias modification. The influences of mesh misalignment on time‐dependent meshing stiffness (TDMS) and STE of unmodified and modified helical gear pairs are investigated. Then, the dynamic transmission error (DTE) of modified helical gears in consideration of mesh misalignment is discussed. The results indicate that the designed modified tooth surface shows good robustness to mesh misalignment.Keywords
Funding Information
- National Natural Science Foundation of China (2020JQ-807, 52005382)
This publication has 37 references indexed in Scilit:
- A hybrid analytical-numerical method based on Isogeometric Analysis for determination of time varying gear mesh stiffnessMechanism and Machine Theory, 2021
- Optimisation of cylindrical gear pairs: A reviewMechanism and Machine Theory, 2021
- A mesh stiffness method using slice coupling for spur gear pairs with misalignment and lead crown reliefApplied Mathematical Modelling, 2021
- On the modelling of gear alignment errors in the tooth contact analysis of spiral bevel gearsMechanism and Machine Theory, 2021
- Influence of profile modifications on meshing stiffness, load sharing, and trasnsmission error of involute spur gearsMechanism and Machine Theory, 2019
- Frictional power losses on spur gears with tip reliefs. The friction coefficient roleMechanism and Machine Theory, 2018
- Effects of tooth profile modification on dynamic responses of a high speed gear-rotor-bearing systemMechanical Systems and Signal Processing, 2016
- Effects of misalignment error, tooth modifications and transmitted torque on tooth engagements of a pair of spur gearsMechanism and Machine Theory, 2015
- Gear transmission dynamic: Effects of tooth profile deviations and support flexibilityApplied Acoustics, 2014
- Effects of tip relief on vibration responses of a geared rotor systemProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013