Vibration and aeroelastic control of wind turbine blade based on B-L aerodynamic model and LQR controller
Author:
Open Access
- 31 March 2017
- journal article
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 19 (2) , 1074-1089
Abstract
Vibration and aeroelastic control of anisotropic composite wind turbine blade modeled as symmetric layup beam analysis have been investigated based on Beddoes-Leishman (B-L) dynamic stall aerodynamic model and linear quadratic controller. The blade is modeled as single-cell thin-walled beam structure, exhibiting flap bending-lag bending-twist coupling deformation, with constant pitch angle set. The stall flutter and aeroelastic control of composite blade are investigated based on some structural and dynamic parameters, with structural damping computed. The aeroelastic partial differential equations are reduced by Galerkin method, with the nonlinear aerodynamic forces computed by the method of fitting static elastic coefficients. Linear quadratic controller is applied to enhance the vibrational behavior in stall situation under divergent conditions and stabilize displacements that might be unstable in the absence of control.Keywords
This publication has 17 references indexed in Scilit:
- Load mitigation of wind turbine blade by aeroelastic tailoring via unbalanced laminates compositesComposite Structures, 2015
- Numerical Investigation of Flapwise-Torsional Vibration Model of a Smart Section Blade with MicrotabShock and Vibration, 2015
- Parameter study of sizing and placement of deformable trailing edge flap on blade fatigue load reductionRenewable Energy, 2015
- Aerodynamic load control in horizontal axis wind turbines with combined aeroelastic tailoring and trailing‐edge flapsWind Energy, 2015
- Active flutter suppression of a multiple-actuated-wing wind tunnel modelChinese Journal of Aeronautics, 2014
- Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theoryEnergy, 2014
- Predicting wind turbine blade loads and aeroelastic response using a coupled CFD–CSD methodRenewable Energy, 2014
- Non-linear aeroelasticity: An approach to compute the response of three-blade large-scale horizontal-axis wind turbinesRenewable Energy, 2014
- Comparison between linear and nonlinear control strategies for variable speed wind turbinesControl Engineering Practice, 2010
- A low‐order model for analysing effects of blade fatigue load controlWind Energy, 2006