DETERMINATION OF IGNITION PROCESSES OF METAL FUEL PARTICLES IN THE DECOMPOSITION PRODUCTS OF PYROTECHNIC MULTICOMPONENT NITRATE-METALLIZED MIXTURES
Authors:
- National University of Civil Defense of UkraineNUNational University of Civil Defense of Ukraine
- Nazarii KoziarNKNazarii Koziar
- Oksana KyrychenkoOKOksana Kyrychenko
- Cherkasy State Technological UniversityCUCherkasy State Technological University
- Cherkasy Institute of Fire Safety Named after Chornobyl Heroes of National University of Civil Defense of UkraineCUCherkasy Institute of Fire Safety Named after Chornobyl Heroes of National University of Civil Defense of Ukraine
- Mariia KutsenkoMKMariia Kutsenko
- Ievgenii ShkoliarISIevgenii Shkoliar
- Ihor NozhkoINIhor Nozhko
- Назарій КозярНКНазарій Козяр
- Оксана КириченкоОКОксана Кириченко
Open Access
- 1 January 2024
- journal article
- Published by National University of Civil Protection of Ukraine in Emergency Situations: Prevention and Liquidation
- Vol. 8 (2) , 44-56
Abstract
The results of experimental studies of the process of ignition of magnesium in gaseous products of thermal decomposition of nitrate-containing oxidizers (nitrates of alkali and alkaline earth metals), additives of organic and inorganic substances that are part of pyrotechnic multi-component nitrate-metallized mixtures, which precede the process of development of combustion of mixtures under conditions of external thermal actions are presented.To prevent premature fire-explosive destruction of products under conditions of external thermal effects, it is necessary, first of all, to have data on the patterns of the ignition process of metal fuel particles in gaseous products of thermal decomposition of oxidants and additives of organic and inorganic substances, which precedes the process of explosive development of combustion of mixtures under the specified conditions.In this paper, it was established that at ambient temperatures above the limitingТз, vapor-phase ignition was always preceded by surface ignition of conglomerates.When studying the effect of alloying elements (Ni, Bi, Zn, Ag, Cu, Sn, Pb, Sb, In, Al) on the ignition temperature of solid magnesium in dry oxygen, it was established that the addition of all these metals to a concentration of several percent causes a decrease in temperature ignition. For example, aluminum lowers the ignition temperature from 896 K for pure Mg to 776 K with an aluminum content of 18% (oxygen pressure is 1.013·105 Pa).Based on these experiments, it was concluded that the value of the ignition temperature of magnesium alloys is inversely proportional to the linear rate of oxidation.The propensity of magnesium to ignite sharply decreases in the presence of 0.5% silicon fluoride in the atmosphere. At the same time, the presence in the air of 1...0.3% of silicon fluoride or sulfur dioxide and 1...0.2% of boron fluoride not only prevents magnesium from igniting, but also stops its burning.Key words:pyrotechnic mixtures, metal fuels, nitrate-containing oxidizers, organic and inorganic substances, ignition and burning processes.Keywords
This publication has 2 references indexed in Scilit:
- Investigation of the Regularities of the Influence of Technological Factors and External Conditions on the Temperature and Content of Condensed Products Oxide-Containing MixturesSolid State Phenomena, 2022
- Study of fire–extinguishing efficiency of environmentally friendly binary aerosol-nitrogen mixturesEastern-European Journal of Enterprise Technologies, 2016