Effect of Sodium-Containing Fluxes on the Residual Sodium Content and Distribution in Al–Mg Alloys
Open Access
Abstract
To get an insight into the residual sodium content of Al–Mg alloys, three types of sodium-containing fluxes were introduced into the melt with different magnesium content. The increment, existing form and distribution of sodium in Al–Mg alloys with different magnesium content were analyzed. The results show that the influence of different sodium salts on the increment of sodium in Al–10Mg alloy is significantly different. The NaF raised the sodium level in Al–10Mg alloy to the highest extent, Na3AlF6 coming second, and NaCl did not have an obvious influence. The magnesium element in the aluminum melt was found to be the key factor leading to the increment of sodium level. After the salt fluxing treatment of aluminum alloy with different magnesium content, this increment would be proportional to the content of magnesium. EDS mapping indicates the sodium introduced by the fluxes was distributed in the form of Na-rich particles in Al–Mg alloys and preferentially located near Al3Mg2(β) phase in the situation of high magnesium content.Keywords
Funding Information
- International Science and Technology Cooperation Programme (2015DFR50470)
This publication has 10 references indexed in Scilit:
- Mechanism to remove oxide inclusions from molten aluminum by solid fluxes refining methodChina Foundry, 2017
- Understanding the hydrogen storage behavior of promising Al–Mg–Na compositions using thermodynamic modelingMaterials for Renewable and Sustainable Energy, 2016
- Existing form and harmful effects of sodium in Al–4.5%Cu alloyTransactions of Nonferrous Metals Society of China, 2015
- Thermodynamic modeling of the Al–Mg–Na systemJournal of Alloys and Compounds, 2006
- Comments on “Intergranular fracture caused by trace impurities in an Al–5.5 mol% Mg alloy”Scripta Materialia, 2002
- Intergranular fracture caused by trace impurities in an Al–5.5 mol% Mg alloyActa Materialia, 2001
- The properties and uses of fluxes in molten aluminum processingJOM, 1998
- Effects of alkali-metal impurities on fracture toughness of 2090 Al-Li-Cu extrusionsMetallurgical and Materials Transactions A, 1996
- The addition of bismuth to aluminum-magnesium alloys to prevent embrittlement by sodiumMetallurgical Transactions A, 1977
- Interaction Between Particles and a Solid-Liquid InterfaceJournal of Applied Physics, 1964