Fabrication and properties of polybutadiene rubber-interpenetrating cross-linking poly(propylene carbonate) network as gel polymer electrolytes for lithium-ion battery
- 17 June 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (65) , 52978-52984
Abstract
Polybutadiene rubber-interpenetrating cross-linking poly(propylene carbonate) (named as XBRPC) membrane can be readily synthesized from polybutadiene rubber (BR), poly(propylene carbonate) (PPC), polyethylene glycol (PEG), and using benzoyl peroxide (BPO) as cross-linking agent, then activated by absorbing liquid electrolyte to fabricate a novel XBRPC gel polymer electrolyte (GPE) for lithium-ion battery. Electrolyte uptake, mechanical strength, ionic conductivity, electrochemical stability window and charge/discharge performances of the XBRPC membranes were then investigated. The results show that the XBRPC GPEs possess good mechanical strength and high electrolyte uptake. The ionic conductivity was up to 1.25 mS cm−1 at room temperature and 3.51 mS cm−1 at 80 °C for XBRPC70 (70/30 of PPC/BR, w/w) sample. Furthermore, the electrochemical stability window has been established to with stand voltages greater than 4.5 V. The results of charge/discharge tests show that the initial discharge capacity of Li/XBRPC70 GPE/LiFePO4 cell is 119 mA h g−1 at a current rate of 0.1C and in voltage range of 2.5–4.0 V at room temperature. It also exhibited excellent cycling retention performance for high-performance lithium rechargeable battery.Keywords
Funding Information
- National Natural Science Foundation of China (51003034/ 21173088)
This publication has 42 references indexed in Scilit:
- The functional separator coated with core–shell structured silica–poly(methyl methacrylate) sub-microspheres for lithium-ion batteriesJournal of Membrane Science, 2015
- Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehiclesJournal of Power Sources, 2014
- Electro-thermal analysis and integration issues of lithium ion battery for electric vehiclesApplied Energy, 2014
- Poly(ethylene oxide)-co-Poly(propylene oxide)-Based Gel Electrolyte with High Ionic Conductivity and Mechanical Integrity for Lithium-Ion BatteriesACS Applied Materials & Interfaces, 2013
- Thermal runaway caused fire and explosion of lithium ion batteryJournal of Power Sources, 2012
- Cycling Characteristics of Lithium Powder Polymer Batteries Assembled with Composite Gel Polymer Electrolytes and Lithium Powder AnodeAdvanced Functional Materials, 2012
- Novel Solid‐State Li/LiFePO4 Battery Configuration with a Ternary Nanocomposite Electrolyte for Practical ApplicationsAdvanced Materials, 2011
- Utilizing an ionic liquid for synthesizing a soft matter polymer “gel” electrolyte for high rate capability lithium-ion batteriesJournal of Materials Chemistry, 2011
- Building better batteriesNature, 2008
- Nanocomposite polymer electrolytes for lithium batteriesNature, 1998