Diagnose Failures Caused by Multiple Locations at a Time
- 16 May 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 22 (4) , 824-837
Abstract
Fault diagnosis plays an important role in physical failure analysis and yield learning process. With tens of billions of transistors being integrated in one chip, multiple faults may exist. With multiple faults, fault masking and reinforcing effects may appear. They may cause the conventional single-fault-based diagnosis methods such as the single location at a time (SLAT) to be invalid. The popular SLAT approach fails if there are not enough SLAT patterns that can be explained by a single stuck-at fault. Moreover, a real silicon defect may behave as different fault models (DM) under different failing patterns, which may invalidate the SLAT approach that uses a single-fault model across all failing patterns. In this paper, we introduce the concept of fault element to support multiple fault models, and use a fault-element graph (FEG) to consider fault masking and reinforcing effects among multiple faults. Based on the FEGs of all failing patterns, the most likely fault locations and their fault elements are iteratively identified. Meanwhile, the FEGs are iteratively pruned to keep track of the remaining multiple fault effects until all the fault locations are identified and all the FEGs are reduced to null. Experiments demonstrate that the proposed diagnosis method can identify the locations of multiple faults even under DM with high diagnostic accuracy and resolution.Keywords
This publication has 37 references indexed in Scilit:
- Diagnosis of Integrated Circuits With Multiple Defects of Arbitrary CharacteristicsIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2010
- Multiple-Fault Diagnosis Using Faulty-Region Identification2009
- Diagnosis of Multiple-Voltage Design With Bridge DefectIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2009
- Multiple defect diagnosis using no assumptions on failing pattern characteristics2008
- Defect Diagnosis - Reasoning Methodology2006
- Incremental fault diagnosisIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2005
- Bridge Defect Diagnosis with Physical Information2005
- Design diagnosis using Boolean satisfiability2004
- Incremental diagnosis and correction of multiple faults and errors2003
- On diagnosing multiple stuck-at faults using multiple and single fault simulation in combinational circuitsIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2002