Self-cleaning, photocatalytic films on aluminum plates for multi-pollutant air remediation: promoting adhesion and activity by SiO 2 interlayers
- 1 September 2021
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 32 (47) , 475710
Abstract
In recent years, nanoparticles have come under close scrutiny for their possible health and environmental issues, making them less attractive for photocatalytic applications in air or water purification. Replacing free nano-powders with active and stable films is thus a fundamental step towards developing effective photocatalytic devices. Aluminum represents a cheap and technologically-relevant substrate, but its photocatalytic applications have been hampered by adhesion issues and metal ion diffusion within the photocatalytic layer. In this work, the use of silica interlayers is investigated as a strategy to promote adhesion, efficiency and reusability of TiO 2 films deposited on aluminum plates. Films were prepared from stable titania sols to avoid the use of nano-powders. Aluminum substrates with different surface morphology were investigated and the role of the silica interlayer thickness was studied. Films were extensively characterized, studying their structure, morphology, optical properties, adhesion and hardness. Self-cleaning properties were studied with respect to their superhydrophilicity and ability to resist fouling via alkylsilanes. Photocatalytic degradation tests were carried out using both volatile organic compounds and NO x , also in recycle tests. The presence of the silica interlayer proved crucial to promote the film robustness and photocatalytic activity. The substrate morphology determined the optimal interlayer thickness, especially in terms of the film reusability.Keywords
Funding Information
- BOF Special Research Fund from Ghent University (GOA project no. 01G00319)
This publication has 41 references indexed in Scilit:
- Sprayed nanostructured TiO2 films for efficient photocatalytic degradation of textile azo dyeJournal of Photochemistry and Photobiology B: Biology, 2012
- Photocatalytic NOx abatement: The role of the material supporting the TiO2 active layerJournal of Hazardous Materials, 2012
- Silane grafting of TiO 2 nanoparticles: dispersibility and photoactivity in aqueous solutionsSurface and Interface Analysis, 2011
- Photocatalytic removal of ethanol and acetaldehyde by N-promoted TiO2 films: The role of the different nitrogen sourcesCatalysis Today, 2011
- Structure stability and corrosion resistance of nano-TiO2 coatings on aluminum in seawater by a vacuum dip-coating methodSurface and Coatings Technology, 2010
- Optimization of the thickness of a photocatalytic film on the basis of the effectiveness factorCatalysis Today, 2007
- Photocatalytic activity and photo-induced hydrophilicity of mesoporous TiO2 thin films coated on aluminum substrateApplied Catalysis B: Environment and Energy, 2007
- Effect of Substrate Sodium Content on Crystallization and Photocatalytic Activity of TiO2Films Prepared by DC Magnetron SputteringInternational Journal of Photoenergy, 2006
- Interface diffusion and reaction between TiO 2 film photocatalyst and aluminium alloy substrateSurface and Interface Analysis, 2001
- Supported titanium oxide as photocatalyst in water decontamination: State of the artCatalysis Today, 1997