Behaviour of Hybrid Fibre-Reinforced Ternary Blend Geopolymer Concrete Beam-Column Joints under Reverse Cyclic Loading
Open Access
Abstract
Beam–column joints are extremely vulnerable to lateral and vertical loads in reinforced concrete (RC) structures. This insufficiency in joint performance can lead to the failure of the whole structure in the event of unforeseen seismic and wind loads. This experimental work was conducted to study the behaviour of ternary blend geopolymer concrete (TGPC) beam-column joints with the addition of hybrid fibres, viz., steel and polypropylene fibres, under reverse cyclic loads. Nine RC beam-column joints were prepared and tested under reverse cyclic loading to recreate the conditions during an earthquake. M55 grade TGPC was designed and used in this present study. The primary parameters studied in this experimental investigation were the volume fractions of steel fibres (0.5% and 1.0%) and polypropylene fibres, viz., 0.1 to 0.25%, with an increment of 0.05%. In this study, the properties of hybrid fibre-reinforced ternary blend geopolymer concrete (HTGPC) beam-column joints, such as their ductility, energy absorption capacity, initial crack load and peak load carrying capacity, were investigated. The test results imply that the hybridisation of fibres effectively enhances the joint performance of TGPC. Also, an effort was made to compare the shear strength of HTGPC beam-column connections with existing equations from the literature. As the available models did not match the actual test results, a method was performed to obtain the shear strength of HTGPC beam-column connections. The developed equation was found to compare convincingly with the experimental test results.Keywords
Funding Information
- Ministry of Science and Higher Education of the Russian Federation (075-15-2022-311)
This publication has 59 references indexed in Scilit:
- Effects of Fibre Geometry and Volume Fraction on the Flexural Behaviour of Steel‐Fibre Reinforced ConcreteStrain, 2011
- Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cementJournal of Cleaner Production, 2011
- Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumiceConstruction and Building Materials, 2011
- Ductility Performance of Hybrid Fibre Reinforced ConcreteAmerican Journal of Applied Sciences, 2008
- Properties of steel fibrous concrete containing mixed fibres in fresh and hardened stateConstruction and Building Materials, 2008
- Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibresCement and Concrete Composites, 2007
- Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRCConstruction and Building Materials, 2007
- Lateral load response of high performance fiber reinforced concrete beam–column jointsConstruction and Building Materials, 2005
- Development of hybrid polypropylene-steel fibre-reinforced concreteCement and Concrete Research, 2000
- Hybrid fibre-reinforced concrete under repeated loadingNuclear Engineering and Design, 1995