Room‐temperature extraction of individual elements from charged spent LiFePO 4 batteries
- 5 February 2022
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 41 (5) , 1595-1604
Abstract
Recycling millions of metric tons of spent LiFePO 4 batteries would benefit human health while reducing resource depletion and environmental pollution. However, recovering individual elements from the spent batteries without generating waste is challenging. Here, we present a distinctive approach for recycling spent LiFePO 4 batteries at room temperature, where water is the only leaching agent consumed. FePO 4 and lithium intercalated graphite act as a precursor material for selectively extracting lithium, iron, and phosphorus through charging the LiFePO 4 batteries to the delithiated state. NaOH solution extracted Fe from FePO 4 within 30 min and regenerated without consumption, similar to a catalyst. Under the optimal leaching conditions (1 mol·L −1 NaOH, 0.5 h, NaOH/Fe molar ratio of 4.5), Fe and P leaching efficiencies achieved 89.1% and 99.2%, respectively. The methodology reflected in this research reduced the material cost per kg cathode material to a fraction of previously published reports, only occupies 6.13% of previous reports. In addition, the method improved the battery recycling revenue calculated by the EverBatt model by 2.31 times and 1.94 times over pyrometallurgical and hydrometallurgical methods. The proposed method allows for the convenient recovery of the elemental components of spent LiFePO 4 batteries.Keywords
Funding Information
- Key-Area Research and Development Program of Guangdong Province (No. 2020B090919003)
This publication has 31 references indexed in Scilit:
- Selective Recovery of Li and Fe from Spent Lithium-Ion Batteries by an Environmentally Friendly Mechanochemical ApproachACS Sustainable Chemistry & Engineering, 2018
- Selective recovery of lithium from spent lithium iron phosphate batteries: a sustainable processGreen Chemistry, 2018
- A Closed-Loop Process for Selective Metal Recovery from Spent Lithium Iron Phosphate Batteries through Mechanochemical ActivationACS Sustainable Chemistry & Engineering, 2017
- Recovery of Lithium, Iron, and Phosphorus from Spent LiFePO4 Batteries Using Stoichiometric Sulfuric Acid Leaching SystemACS Sustainable Chemistry & Engineering, 2017
- Advanced carbon materials/olivine LiFePO 4 composites cathode for lithium ion batteriesJournal of Power Sources, 2016
- Optimized Li and Fe recovery from spent lithium-ion batteries via a solution-precipitation methodRSC Advances, 2016
- Recovery of cathode materials and Al from spent lithium-ion batteries by ultrasonic cleaningWaste Management, 2015
- A green recycling process designed for LiFePO 4 cathode materials for Li-ion batteriesJournal of Materials Chemistry A, 2015
- Process Development for the Recycle of Spent Lithium Ion Batteries by Chemical PrecipitationIndustrial & Engineering Chemistry Research, 2014
- Lithium deintercalation in LiFePO4 nanoparticles via a domino-cascade modelNature Materials, 2008