Orthogonal experimental research on the structural parameters of a novel drill bit used for ice core drilling with air reverse circulation
Authors:
Open Access
- 22 October 2019
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 65 (254) , 1011-1022
Abstract
A new type of ice core drill bit, designed with a vane swirler, was developed for ice core drilling with air reverse circulation. An orthogonal experimental design method was employed to investigate the effects of the swirler structure parameters on the reverse circulation performance of the drill bit including helical angle, number of blades, blade length and blade central angle, etc. The entrainment ratio was used to evaluate the reverse circulation effectiveness of the drill bit. The results show that the helical angle is the dominant factor regardless of whether or not the flushing nozzles are part of the design of the drill bit. The number of blades is the least important factor for the drill bit designed with the flushing nozzles (referred to as drill bit I), while the outlet area of the swirling slot is the least influential factor for the drill bit without flushing nozzles (referred to as drill bit П). In addition, the appearance of the ice core has a certain effect on the air reverse circulation for both drill bits. Within the ranges of this study, the optimal structure of the drill bit was determined based on the range analysis of the orthogonal design.Keywords
This publication has 17 references indexed in Scilit:
- Research on suction capacity and dust suppression performance of a reverse circulation air hammer in tunnel drillingTunnelling and Underground Space Technology, 2018
- Rapid Access Ice Drill: a new tool for exploration of the deep Antarctic ice sheets and subglacial geologyJournal of Glaciology, 2016
- Fluid dynamics and heat transfer investigations of swirling decaying flow in an annular pipe Part 1: Review, problem description, verification and validationInternational Journal of Heat and Mass Transfer, 2016
- Firn permeability impacts on pressure loss associated with rapid air movement drillingCold Regions Science and Technology, 2016
- Development of a specially designed drill bit for down-the-hole air hammer to reduce dust production in the drilling processJournal of Cleaner Production, 2016
- Fractal turbulence enhancing low-swirl combustionCombustion and Flame, 2015
- Drill heads of the deep ice electromechanical drillsCold Regions Science and Technology, 2014
- Ice Drilling and Coring2009
- The Hans Tausen drill: design, performance, further developments and some lessons learnedAnnals of Glaciology, 2007
- Intermediate-depth ice coring of high-altitude and polar glaciers with a lightweight drilling systemJournal of Glaciology, 2005