Mechanical and Wear Behaviour of Nano‐Fly Ash Particle‐Reinforced Mg Metal Matrix Composites Fabricated by Stir Casting Technique
Open Access
- 1 January 2022
- journal article
- research article
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Abstract
In recent years, magnesium‐based alloys and composites have great attention in automobile, structural, and biomedical industries due to their desirable characteristics such as lower density, low elastic modulus, high specific strength, better damping properties, and excellent castability. The pure magnesium was used as a matrix material and reinforced with fly ash fillers of different compositions with a weight percentage of 2.5%, 5%, and 7.5% to compare with the pure magnesium. The three different weights (wt%) of fly ash/Mg samples were prepared using the bottom pouring stir casting method. Fabricated samples sliding wear characteristics and mechanical behaviour (ASTM standard) were studied. Wear, tensile, and hardness results portray that 7.5 wt% fly ash composites possess better elongation and hardness and good wear resistance. The tensile strength values were improved by 42% in sample 4 compared with pure Mg. Hardness values were also improved by 21% in sample 4 compared with pure Mg. The wear rate and coefficient of friction are also reduced by the increased weight percentage of fly ash reinforcement. SEM images display casted pure magnesium’s morphology and wear‐tested samples’ worn surface characteristics.Keywords
Funding Information
- mettu university
This publication has 32 references indexed in Scilit:
- Electromagnetic interference shielding effectiveness of magnesium alloy-fly ash compositesJournal of Alloys and Compounds, 2015
- Investigation on mechanical properties and creep behavior of stir cast AZ91-SiCp compositesJournal of Magnesium and Alloys, 2015
- Microstructure and mechanical properties of Mg/SiC and AZ80/SiC nano-composites fabricated through stir casting methodMaterials Science and Engineering: A, 2015
- Synthesis and characterization of sintered hybrid aluminium matrix composites reinforced with nanocopper oxide particles and microsilicon carbide particlesComposites Part B: Engineering, 2014
- Microstructure and mechanical properties of aluminum–fly ash nano composites made by ultrasonic methodMaterials & Design (1980-2015), 2012
- Synthesis and characterization of 356-SiCp composites by stir casting and compocasting methodsTransactions of Nonferrous Metals Society of China, 2010
- Microstructure and mechanical behavior of die casting AZ91D-Fly ash cenosphere compositesComposites Part A: Applied Science and Manufacturing, 2009
- Synthesis and Characterization of Nano-Structured Fly Ash: A Waste from Thermal Power PlantProceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 2009
- Wear behavior of Al–Cu and Al–Cu/SiC components produced by powder metallurgyJournal of Materials Science, 2008
- Wear behaviour of SiCp-reinforced magnesium matrix compositesWear, 2003