Use of Goethite as an anti-corrosive Pigment
Open Access
- 1 January 2025
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20250092
Abstract
Carbon steel is widely used as a metallic material, despite its limited corrosion resistance. To enhance its anti-corrosion properties, organic coatings such as epoxy are commonly applied due to their barrier mechanism. This study investigates the corrosion resistance of epoxy coatings reinforced with various ratios of iron oxides and goethite as anticorrosive pigments. The research aims to evaluate the adhesion and anticorrosive properties of waste mineral goethite (α-FeOOH) pigments in comparison to micaceous and red iron oxides. Coating morphology and chemical element distribution were analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Electrochemical characterization techniques—including electrochemical impedance spectroscopy (EIS), linear and potentiodynamic polarization, and accelerated salt spray corrosion tests—were employed. Additionally, coating adherence was assessed via pull-off tests. Results demonstrated that goethite-based paints exhibited anticorrosive performance comparable to industrially used red and micaceous iron oxides, regardless of pigment concentration. The results of EIS showed that the 5% goethite formulation reached an impedance modulus of |Z|0.01Hz ≈ 1011 Ω·cm2 after 90 days. However, salt spray results showed that the area with corrosion products around the incision in the painted test specimens was quantified, showing the smallest reduction in corroded areas for the samples with 10 and 20% goethite concentration applied to the coating. These findings highlight the potential of mining waste goethite as a sustainable and effective anticorrosive pigment when properly optimized.Keywords
Funding Information
- FAPEMIG (PCE-00376-24)
- FAPEMIG (88881.910466/2023-01)
- FAPEMIG (312552/2022-0)
- CAPES (PCE-00376-24)
- CAPES (88881.910466/2023-01)
- CAPES (312552/2022-0)
- CNPq (PCE-00376-24)
- CNPq (88881.910466/2023-01)
- CNPq (312552/2022-0)
This publication has 28 references indexed in Scilit:
- Synthesis and characterization of a protective coating against corrosion based on scale and iron pigmentSN Applied Sciences, 2019
- Structural, optical and magnetic properties of cobalt doped hematite nanoparticlesChemical Physics, 2019
- Thermo-mechanical characterization of siliconized E-glass fiber/hematite particles reinforced epoxy resin hybrid compositeApplied Surface Science, 2016
- Mechanical, thermal and dielectric properties of hybrid composites of epoxy and reduced graphene oxide/iron oxideMaterials & Design, 2016
- Evaluation of the corrosion resistance of an epoxy-polyamide coating containing different ratios of micaceous iron oxide/Al pigmentsCorrosion Science, 2011
- Anticorrosive coatings: a reviewJournal of Coatings Technology and Research, 2009
- Raman identification of natural red to yellow pigments: ochre and iron‐containing oresJournal of Raman Spectroscopy, 2008
- The preparation of magnetite, goethite, hematite and maghemite of pigment quality from mill scale iron wasteDyes and Pigments, 2007
- Another approach in analysis of paint coatings with EIS measurement: Phase angle at high frequenciesCorrosion Science, 2006
- Corrosion resistance and dielectric properties of an iron oxide filled epoxy coatingJournal of Coatings Technology, 1997