Electrochemical and surface analytical study of the corrosion behavior of mild steel with cathodically produced zinc phosphate coating
- 21 October 2009
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 41 (12-13) , 911-917
Abstract
Corrosion protection of mild steel by zinc phosphate coatings produced by electrolytic phosphating under cathodic polarization was investigated by electrochemical and surface analytical techniques. The cathodically produced coating mainly consists of zinc phosphate as hopeite, with incorporation of a small amount of metallic zinc. Surface characterization by X‐ray diffraction, SEM and energy dispersive X‐ray as a function of exposure time in neutral and alkaline solutions gives information on solution‐induced changes of the protective layers. In neutral NaCl solution, the electrolytic zinc phosphate coating shows a very good corrosion protection, which even increases as a function of exposure time. Surface analytical investigations reveal that this is due to a formation of an underlayer of Zn(OH) 2 at the metal/coating interface. This corrosion product layer is an additional barrier blocking the bare metal surface in the pores of the zinc phosphate coating. In alkaline solution, phosphate is preferentially dissolved from the coating, changing the chemical composition of the coating to ZnO. Copyright © 2009 John Wiley & Sons, Ltd.Keywords
Funding Information
- Chemetall GmbH
This publication has 14 references indexed in Scilit:
- Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodicProgress in Organic Coatings, 2009
- Corrosion behaviour in alkaline medium of zinc phosphate coated steel obtained by cathodic electrochemical treatmentCorrosion Science, 2009
- Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatmentSurface and Coatings Technology, 2006
- Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion testsElectrochimica Acta, 2005
- Microscopic local elements in the phosphating processElectrochimica Acta, 2003
- Phosphate coating on steel surfaces by an electrochemical methodSurface and Coatings Technology, 2002
- Evaluation of the corrosion performance of zinc-phosphate-painted carbon steelSurface and Coatings Technology, 1999
- Characterisation of phosphate coatings on zinc, zincnickel and mild steel by impedance measurements in dilute sodium phosphate solutionsCorrosion Science, 1997
- Corrosion and protection characteristics of zinc and manganese phosphate coatingsSurface and Coatings Technology, 1997
- Elektrochemische Charakterisierung von Phosphatschichten auf verzinktem StahlMaterials and Corrosion, 1995