A Study on CuO-Al2O3 Infiltration by Aluminium
- 12 January 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 636-637, 571-577
Abstract
This paper reports preliminary studies regarding a new fabrication process for aluminium alloy matrix particulate reinforced composites, which uses ceramic preforms with alumina and tailored amounts of reactive copper oxide, CuO. An Al2O3-CuO mixture with 75 mol% CuO was selected, aiming at a 10-40vol% reinforcement phase fraction in the final composite, after aluminium infiltration. Molten aluminium infiltration progress was studied as a function of ceramic’s composition, doping, and infiltration time. The resulting microstructures were investigated by OM, SEM, FESEM and EDS in order to establish the liquid aluminium infiltration profile at the metal/ceramic interface. Infiltration experiments showed that the 3CuO (s) + 2Al (l) → 3Cu (l) + Al2O3 (s) redox reaction is triggered at the experimental conditions used, but the infiltration process is slow and does not go to completion. The use of NaOH as a doping agent promotes effective infiltration of molten aluminium upon the ceramic green mixture.Keywords
This publication has 19 references indexed in Scilit:
- Synthesis of an Al2O3/Al co-continuous composite by reactive melt infiltrationMaterials Characterization, 2007
- Ceramic and metal matrix composites: Routes and propertiesJournal of Materials Processing Technology, 2006
- Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strengthScripta Materialia, 2006
- Effects of particle size on fatigue crack initiation and small crack growth in SiC particulate-reinforced aluminium alloy compositesMaterials Letters, 2004
- Reactions at the Interface Between Al2O3–SiO2 Ceramics with Additives of Alkaline-earth Oxides and Liquid Al–Si AlloyJournal of Materials Research, 2002
- New technique for pressureless infiltration of Al alloys into Al2O3 preformsJournal of Materials Research, 2001
- Forming Al2O3–Al Composites with Controlled Compositions by Reactive Metal Penetration of Dense Aluminosilicate PreformsJournal of the American Ceramic Society, 2000
- Recent development in aluminium alloys for aerospace applicationsMaterials Science and Engineering: A, 2000
- Fabrication of CMCs and MMCs Using Novel ProcessesKey Engineering Materials, 1996
- An Introduction to Metal Matrix Composites1993