Load torque observer based sliding mode control method for permanent magnet synchronous motor
Authors:
- 1 May 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19489439,p. 550-555
Abstract
Considering the control performance requirements of high-performance printing press, a sliding-mode speed controller with torque feed-forward compensation is proposed in this paper. First, a sliding mode control method is presented for the permanent magnet synchronous motor(PMSM) of the printing press. Then, in order to reduces chattering phenomenon caused by system parameter variations and external time-varying load torque disturbances, by using a cascade observer design technique based on the sliding mode control, a load torque observer and a load torque derivatives observer are designed respectively. Since the estimated load torque and its derivatives are considered as the feed-forward compensation part to compensate sliding mode speed controller, the sliding mode controller may take a smaller gain for switching functions without sacrificing load disturbance rejection performance. The stability of the proposed scheme is verified using the Lyapunov method to determine the observer gain. The simulation result shows that the observer-based control scheme can decrease the chattering phenomenon effectively and improve control performance of PMSM remarkably.Keywords
This publication has 10 references indexed in Scilit:
- A High-Speed Sliding-Mode Observer for the Sensorless Speed Control of a PMSMIEEE Transactions on Industrial Electronics, 2010
- Disturbance Observer for Estimating Higher Order Disturbances in Time Series ExpansionIEEE Transactions on Automatic Control, 2010
- Chattering AnalysisIEEE Transactions on Automatic Control, 2010
- Hybrid Terminal Sliding-Mode Observer Design Method for a Permanent-Magnet Synchronous Motor Control SystemIEEE Transactions on Industrial Electronics, 2009
- Sensor fault detection and isolation for nonlinear systems based on a sliding mode observerInternational Journal of Adaptive Control and Signal Processing, 2007
- Development and Testing of the Torque Control for the Permanent-Magnet Synchronous MotorIEEE Transactions on Industrial Electronics, 2005
- A state-dependent boundary layer design for sliding mode controlIEEE Transactions on Automatic Control, 2002
- A nonlinear speed control for a PM synchronous motor using a simple disturbance estimation techniqueIEEE Transactions on Industrial Electronics, 2002
- Neural-network-based self-tuning PI controller for precise motion control of PMAC motorsIEEE Transactions on Industrial Electronics, 2001
- Tracking control of non-linear systems using sliding surfaces, with application to robot manipulators†International Journal of Control, 1983