Wood polypropylene composites prepared by thermally modified fibers at two extrusion speeds: mechanical and viscoelastic properties
Authors:
- Haroutioun AskanianHAHaroutioun Askanian
- Vincent VerneyVVVincent Verney
- Sophie CommereucSCSophie Commereuc
- 22 August 2014
- journal article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 69 (3) , 313-319
Abstract
Composites have been prepared with polypropylene (PP) as a matrix and pine flours, either thermally treated (Wtr) or not (W), as fillers resulting in wood plastic composites (WPCs). The treatment by retification at 280° mainly elevates the hydrophobicity of wood. The WPCs were fabricated with a co-rotating twin-screw extruder with the screw speeds of 500 and 1200 rpm and specimens were prepared by injection molding. Viscoelastic behavior, tensile test and Charpy impact test of Wtr PC were compared with PP and WPC. Wtr PC has a better dispersion and highest tensile modulus. As expected, a decrease in elongation at break and impact strength was observed for all composites. Processing at 1200 rpm improved by 60% the Young modulus of the WPC compared to 500 rpm, whereas 500 rpm was enough to obtain the highest modulus for Wtr PC.Keywords
This publication has 15 references indexed in Scilit:
- Effects of polymeric matrix on accelerated UV weathering properties of wood-plastic compositesHolzforschung, 2012
- Effects of hemicellulose extraction on properties of wood flour and wood–plastic compositesComposites Part A: Applied Science and Manufacturing, 2012
- Surface modification of wood flour and its effect on the properties of PP/wood compositesComposites Part A: Applied Science and Manufacturing, 2007
- Effects of the chemical foaming agents, injection parameters, and melt‐flow index on the microstructure and mechanical properties of microcellular injection‐molded wood‐fiber/polypropylene compositesJournal of Applied Polymer Science, 2005
- Maleated coupling agents for natural fibre compositesComposites Part A: Applied Science and Manufacturing, 2004
- Mechanical properties of wood flake–polyethylene composites. II. Interface modificationJournal of Applied Polymer Science, 2002
- Role of paper sludge particle size and extrusion temperature on performance of paper sludge–thermoplastic polymer compositesJournal of Applied Polymer Science, 2001
- The nature of adhesion in composites of modified cellulose fibers and polypropyleneJournal of Applied Polymer Science, 1991
- Thermal treatment of wood: analysis of the obtained productWood Science and Technology, 1989
- Characterization and analysis of torrefied woodWood Science and Technology, 1988