The cellular level mode I fracture behaviour of spruce and birch in the RT crack propagation system
- 14 April 2015
- journal article
- research article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 70 (2) , 157-165
Abstract
The effect of the microscopic structure and the moisture content (MC) of wood on its fracture behaviour has been investigated. Green and air-dried spruce (Picea abies [L.] Karst.) and birch (Betula pendula Roth.) wood were subjected to pure mode I loading in the radial- tangential (RT) crack propagation system. Tests were carried out in situ in an environmental scanning electron microscope to observe crack propagation at the cellular level. Crack-tip displacement fields were computed by digital image correlation, and crack propagation was observed from the images captured during testing. Both the MC and the microscopic structure were found to affect the fracture process. In the air-dried birch and spruce, only microcracking caused large displacements ahead of the crack-tip. In spruce, the microcracking zone was larger than in birch. In green birch and spruce, microcracking was less evident than in the air-dried specimens, and in some cases, there were notable deformations in a few cells ahead of the crack-tip before crack extension. Microcracking is considered to be the main toughening mechanism in spruce and birch in the RT crack propagation system.Keywords
This publication has 24 references indexed in Scilit:
- The fracture behavior of birch and spruce in the radial-tangential crack propagation direction at the scale of the growth ringHolzforschung, 2013
- Revisiting the neutral axis in wood beamsHolzforschung, 2012
- Measurement of wood shrinkage in jack pine using three dimensional digital image correlation (DIC)Holzforschung, 2012
- Determination of local material properties of OSB sample by coupling advanced imaging techniques and morphology-based FEM simulationHolzforschung, 2011
- Micromechanics of creep and relaxation of wood. A review COST Action E35 2004–2008: Wood machining – micromechanics and fractureHolzforschung, 2008
- Modeling crack propagation in wood and wood composites. A review COST Action E35 2004–2008: Wood machining – micromechanics and fractureHolzforschung, 2008
- Fracture behaviour of wood and its composites. A review COST Action E35 2004–2008: Wood machining – micromechanics and fractureHolzforschung, 2008
- Quality assessment of speckle patterns for digital image correlationOptics and Lasers in Engineering, 2006
- Bridging crack model for fracture of spruceEngineering Fracture Mechanics, 2002
- Relaxation behaviour of the amorphous components of woodJournal of Materials Science, 1987