Compact and efficient O-band bismuth-doped phosphosilicate fiber amplifier for fiber-optic communications
Open Access
- 9 July 2020
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-9
Abstract
During last decades there has been considerable interest in developing a fiber amplifier for the 1.3- $$\upmu $$ m spectral region that is comparable in performance to the Er-doped fiber amplifier operating near 1.55 $$\upmu $$ m. It is due to the fact that most of the existing fiber-optic communication systems that dominate terrestrial networks could be used for the data transmission in O-band (1260–1360 nm), where dispersion compensation is not required, providing a low-cost increase of the capacity. In this regard, significant efforts of the research laboratories were initially directed towards the study of the praseodymium-doped fluoride fiber amplifier having high gain and output powers at the desired wavelengths. However, despite the fact that this type of amplifiers had rapidly appeared as a commercial amplifier prototype it did not receive widespread demand in the telecom industry because of its low efficiency. It stimulated the search of novel optical materials for this purpose. About 10 years ago, a new type of bismuth-doped active fibers was developed, which turned out to be a promising medium for amplification at 1.3 $$\upmu $$ m. Here, we report on the development of a compact and efficient 20-dB (achieved for signal powers between $$-40$$ and $$-10$$ dBm) bismuth-doped fiber amplifier for a wavelength region of 1300–1350 nm in the forward, backward and bi-directional configurations, which can be pumped by a commercially available laser diode at 1230 nm with an output power of 250 mW. The compactness of the tested amplifier was provided by using a depressed cladding active fiber with low bending loss, which was coiled on a reel with a radius of 1.5 cm. We studied the gain and noise figure characteristics at different pump and signal powers. A record gain coefficient of 0.18 dB/mW (at the pump-to-signal power conversion efficiency of above 27 $$\%$$ ) has been achieved.
Keywords
Funding Information
- Russian Science Foundation (19-79-00034)
This publication has 19 references indexed in Scilit:
- Bi-doped fiber amplifier with a flat gain of 25 dB operating in the wavelength band 1320–1360 nmOptics Letters, 2016
- Luminescence properties of IR-emitting bismuth centres in SiO2-based glasses in the UV to near-IR spectral regionQuantum Electronics, 2015
- Combined excitation-emission spectroscopy of bismuth active centers in optical fibersOptics Express, 2011
- Efficient bi-doped fiber lasers and amplifiers for the spectral region 1300-1500 nm2010
- Bismuth-doped fibre amplifier for the range 1300 — 1340 nmQuantum Electronics, 2009
- 2 W bismuth doped fiber lasers in the wavelength range 1300-1500 nm and variation of Bi-doped fiber parameters with core compositionLaser Physics Letters, 2009
- Bi-doped fiber lasers and amplifiers for a spectral region of 1300–1470 nmOptics Letters, 2008
- Study of thermal stability and luminescence quenching properties of bismuth-doped silicate glasses for fiber laser applicationsApplied Physics Letters, 2008
- Erbium-Doped Fiber Amplifiers: Principles and ApplicationsPhysics Today, 1995
- The performance of depressed-cladding single-mode fibers with different b/a ratiosJournal of Lightwave Technology, 1991