Design of Poly(Acrylonitrile)-Based Gel Electrolytes for High-Performance Lithium Ion Batteries
Authors:
- 20 October 2014
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (21) , 19360-19370
Abstract
The use of polyacrylonitrile (PAN) as a host for gel polymer electrolytes (GPEs) commonly produces a strong dipole–dipole interaction with the polymer. This study presents a strategy for the application of PAN in GPEs for the production of high performance lithium ion batteries. The resulting gel electrolyte GPE-AVM comprises a poly(acrylonitrile-co-vinyl acetate) copolymer blending poly(methyl methacrylate) as a host, which is swelled using a liquid electrolyte (LE) of 1 M LiPF6 in carbonate solvent. Vinyl acetate and methacrylate groups segregate the PAN chains in the GPE, which produces high ionic conductivity (3.5 × 10 –3 S cm–1 at 30 °C) and a wide electrochemical voltage range (>6.5 V) as well as an excellent Li+ transference number of 0.6. This study includes GPE-AVM in a full-cell battery comprising a LiFePO4 cathode and graphite anode to promote ion motion, which reduced resistance in the battery by 39% and increased the specific power by 110%, relative to the performance of batteries based on LE. The proposed GPE-based battery has a capacity of 140 mAh g–1 at a discharge rate of 0.1 C and is able to deliver 67 mAh g–1 of electricity at 17 C. The proposed GPE-AVM provides a robust interface with the electrodes in full-cell batteries, resulting in 93% capacity retention after 100 charge–discharge cycles at 17 C and 63% retention after 1000 cycles.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (101-2221-E-006-225-MY3, 101-2221-E-006-243-MY3, 102-3113-E-006-002, 103-3113-E-006 -009)
- Ministry of Education, Taiwan
This publication has 69 references indexed in Scilit:
- A novel high-performance gel polymer electrolyte membrane basing on electrospinning technique for lithium rechargeable batteriesJournal of Power Sources, 2011
- Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: Preparation and property of PVDF/poly(dimethylsiloxane) blending membraneJournal of Membrane Science, 2011
- Preparation and electrochemical characterization of gel polymer electrolyte based on electrospun polyacrylonitrile nonwoven membranes for lithium batteriesJournal of Power Sources, 2011
- Lithium-ion batteries. A look into the futureEnergy & Environmental Science, 2011
- Ion transport and ion–filler-polymer interaction in poly(methyl methacrylate)-based, sodium ion conducting, gel polymer electrolytes dispersed with silica nanoparticlesJournal of Power Sources, 2010
- Room temperature cross-linkable gel polymer electrolytes for lithium ion batteries by in situ cationic polymerization of divinyl etherElectrochemistry Communications, 2010
- Lithium ion conducting PVdF-HFP composite gel electrolytes based on N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)-imide ionic liquidJournal of Power Sources, 2010
- Magnesium ion-conducting gel polymer electrolytes dispersed with nanosized magnesium oxideJournal of Power Sources, 2009
- Gel-based composite polymer electrolytes with novel hierarchical mesoporous silica network for lithium batteriesElectrochimica Acta, 2008
- Gel-type polymer electrolytes with different types of ceramic fillers and lithium salts for lithium-ion polymer batteriesJournal of Power Sources, 2006