Wireless Power Transfer to a Microaerial Vehicle with a Microwave Active Phased Array
Open Access
- 19 May 2014
- journal article
- research article
- Published by Hindawi Limited in International Journal of Antennas and Propagation
- Vol. 2014, 1-5
Abstract
A wireless power transfer system using a microwave active phased array was developed. In the system, power is transferred to a circling microaerial vehicle (MAV) by a microwave beam of 5.8GHz, which is formed and directed to the MAV using an active phased array antenna. The MAV is expected to support observation of areas that humans cannot reach. The power beam is formed by the phased array with eight antenna elements. Input power is about 5.6W. The peak power density at 1,500mm altitude was 2.63mW/cm2. The power is sent to a circling MAV. Therefore, the transfer beam should be polarized circularly to achieve a constant power supply independent of its yaw angle. To minimize the polarization loss, a sequentially routed antenna (SRA) was applied to the transmitter antenna. Results show that the axial ratio of 0.440dB was accomplished and that power fluctuation was kept below 1%.Keywords
This publication has 3 references indexed in Scilit:
- Microwave Wireless Power Supply System to a Micro Aerial VehicleJOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 2011
- Power Transmission to a Micro Aerial Vehicle2007
- A self-steering array for the SHARP microwave-powered aircraftIEEE Transactions on Antennas and Propagation, 1992