A Voltage-Behind-Reactance Model of Five-Phase Induction Machines Considering the Effect of Magnetic Saturation
- 13 May 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 28 (3) , 576-592
Abstract
Five-phase induction machines are generally modeled using multiple dq planes or using a phase variable model. This paper considers modeling five-phase induction machines using a voltage-behind-reactance (VBR) configuration. This configuration lends itself suitable for time-domain circuit-based simulators as the MATLAB/Simulink SimPowerSystems (SPS) toolbox. The stator electrical dynamics are represented in five-phase coordinates, while the rotor electrical circuit is modeled using rotor flux linkage as the state variable and expressed in the dq stator reference frame. The VBR model is equivalent to a conventional dq model; however, it facilitates the connection of an external inductance without affecting numerical accuracy and calculation efficiency. It also facilitates the simulation of different winding connections, series-connected multimotors, and open phase(s) conditions. The model is, first, derived for a magnetically linear system and then it is extended to include the effect of magnetic saturation. The flux correction method is used to represent the effect of magnetic saturation with a simple modification to represent the effect of cross coupling between fundamental and third sequence planes due to saturation effect. The dynamic cross saturation is considered by adding compensating terms that depend on magnetizing inductance variation. The proposed model is experimentally verified using a prototype 1.5-hp five-phase induction machine under different operating conditions.Keywords
This publication has 42 references indexed in Scilit:
- Influence of Saturation on the Airgap Induction Waveform of Five-Phase Induction MachinesIEEE Transactions on Energy Conversion, 2011
- Wide Operational Speed Range of Five-Phase Permanent Magnet Machines by Using Different Stator Winding ConfigurationsIEEE Transactions on Industrial Electronics, 2011
- A customizable voltage behind reactance squirrel cage induction machine model for PSCAD/EMTDC2011
- Direct-Matrix-Converter-Based Drive for a Three-Phase Open-End-Winding AC Machine With Advanced FeaturesIEEE Transactions on Industrial Electronics, 2010
- Derating of Multiphase Induction Machines Due to Supply ImbalanceIEEE Transactions on Industry Applications, 2010
- Including Magnetic Saturation in Voltage-Behind-Reactance Induction Machine Model for EMTP-Type SolutionIEEE Transactions on Power Systems, 2009
- Approximate Voltage-Behind-Reactance Induction Machine Model for Efficient Interface With EMTP Network SolutionIEEE Transactions on Power Systems, 2009
- Modeling of Induction Machines Using a Voltage-Behind-Reactance FormulationIEEE Transactions on Energy Conversion, 2008
- Modeling and Control of Six-Phase Symmetrical Induction Machine Under Fault Condition Due to Open PhasesIEEE Transactions on Industrial Electronics, 2008
- Modeling and simulation of saturated induction motors in phase quantitiesIEEE Transactions on Energy Conversion, 1999