Fe-Cr-C-TiC High-Chromium Fe-Based Ceramic Composite Coating Prepared by PTA Weld-Surfacing Process
Authors:
- 1 February 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 675-677, 783-787
Abstract
In situ synthesized Fe-Cr-C-TiC high-chromium Fe-based ceramic composite coating was fabricated on substrate of Q235 steel by plasma transferred arc (PTA) weld-surfacing process using the mixture of ferrotitanium, ferrochromium, ferroboron and ferrosilicium powders. The microstructure and wear properties of the composite coating were investigated by XRD, SEM, EDS, microhardness tester and wear tester. Results show that the coating consists of TiC, (Cr,Fe)7C3 and austenite. The coating is metallurgically bonded to the Q235 steel substrate. TiC particles formed by PTA weld-surfacing process present cubic, dendrite and flower-like shape. The wear resistance of the composite coating is approximately 11 times higher than that of the base body Q235. As the load increases, the wear mass loses slowly, which demonstrates the composite coating has excellent load character.Keywords
This publication has 9 references indexed in Scilit:
- Microstructure and properties of TiC–Fe cermet coatings by reactive flame spraying using asphalt as carbonaceous precursorCeramics International, 2007
- Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting processSurface and Coatings Technology, 2007
- Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatingsWear, 2005
- Laser in-situ synthesis of mixed carbide coating on steelJournal of Materials Science, 2004
- Effect of form of carbon on the microstructure of in situ synthesized TiC-reinforced iron-based compositeMaterials Letters, 2004
- Synthesis of boride coatings on steel using plasma transferred arc (PTA) process and its wear performanceWear, 2002
- Tribological behaviour at room temperature and at 550°C of TiC-based plasma sprayed coatings in fretting gross slip conditionsWear, 2000
- In situ formation by laser cladding of a TiC composite coating with a gradient distributionSurface and Coatings Technology, 1999
- Titanium carbide–iron composite coatings by reactive plasma spraying of ilmeniteJournal of Alloys and Compounds, 1999