Strengthening of Reinforced Concrete Beams Subjected to Concentrated Loads Using Externally Bonded Fiber Composite Materials
Open Access
Abstract
Renovation, restoration, remodeling, refurbishment, and the retrofitting of buildings often imply applying forces (i.e., concentrated loads) to beams that before were subjected to distributed loads only. In the case of reinforced concrete structures, the new condition causes a beam to bear a concentrated load with the crack pattern that resulted from the distributed loads which had acted before. If the concentrated load is applied at or near the beam’s midspan, the new shear demand reaches the maximum where cracks are vertical or quasi-vertical, and where inclined bars are not common according to any standards. So, the actual shear capacity can be substantially lower than new shear demand due to the concentrated load. This paper focuses on reinforced concrete beams whose load distribution has to be changed from distributed to concentrated and presents a design method to bring the beam’s shear capacity up to the new demand. The method consists of applying fiber composites (fiber-reinforced polymers or fiber-reinforced cementitious material) with fibers at an angle of 45° bonded to the beam’s web. This kind of external reinforcement arrangement has to comply with some practical measures, which are presented as well. The paper also provides the analytical model that predicts the concentrated load-carrying capacity of a beam in the strengthened state. The model accounts for the crack’s verticality, which nullifies the contributions of steel stirrups, aggregate interlock, and dowel action, and for the effective bond length of each fiber, which depends on the distance between the ends of the fiber and the crack it crosses.Keywords
All Related Versions
This publication has 66 references indexed in Scilit:
- Effectiveness of novel methods to increase the FRP-masonry bond capacityComposites Part B: Engineering, 2016
- Seismic performance of precast reinforced concrete buildings with dowel pin connectionsJournal of Building Engineering, 2016
- The central role played by structural design in enabling the construction of buildings that advanced and revolutionized architectureConstruction and Building Materials, 2016
- Mechanical behavior of the timber–terrazzo composite floorConstruction and Building Materials, 2015
- Analytical model to predict the lifetime of concrete members externally reinforced with FRPTheoretical and Applied Fracture Mechanics, 2015
- Application-Oriented Chemical Optimization of a Metakaolin Based GeopolymerMaterials, 2013
- PREDICTIVE MULTISCALE MODEL OF DELAYED DEBONDING FOR CONCRETE MEMBERS WITH ADHESIVELY BONDED EXTERNAL REINFORCEMENTComposites: Mechanics, Computations, Applications: An International Journal, 2012
- Design of Concrete Flexural Members Strengthened in Shear with FRPJournal of Composites for Construction, 2000
- Toward a Consistent Design of Structural ConcretePCI Journal, 1987
- Reducing the shear reinforcement in reinforced concrete beams and slabsMagazine of Concrete Research, 1965