Experimental and Empirical Time to Corrosion of Reinforced Concrete Structures under Different Curing Conditions
Open Access
- 16 October 2014
- journal article
- research article
- Published by Hindawi Limited in Advances in Civil Engineering
- Vol. 2014, 1-9
Abstract
Reinforced concrete structures, especially those in marine environments, are commonly subjected to high concentrations of chlorides, which eventually leads to corrosion of the embedded reinforcing steel. The total time to corrosion of such structures may be divided into three stages: corrosion initiation, cracking, and damage periods. This paper evaluates, both empirically and experimentally, the expected time to corrosion of reinforced concrete structures. The tested reinforced concrete samples were subjected to ten alternative curing techniques, including hot, cold, and normal temperatures, prior to testing. The corrosion initiation, cracking, and damage periods in this investigation were experimentally monitored by an accelerated corrosion test performed on reinforced concrete samples. Alternatively, the corrosion initiation time for counterpart samples was empirically predicted using Fick’s second law of diffusion for comparison. The results showed that the corrosion initiation periods obtained experimentally were comparable to those obtained empirically. The corrosion initiation was found to occur at the first jump of the current measurement in the accelerated corrosion test which matched the half-cell potential reading of around −350 mV.Keywords
This publication has 6 references indexed in Scilit:
- Corrosion-Induced Cover Cracking: New Test Data and Predictive ModelsACI Structural Journal, 2011
- Structural assessment of corroded self-consolidating concrete beamsEngineering Structures, 2010
- Corrosion resistance of self-consolidating concrete in full-scale reinforced beamsCement and Concrete Composites, 2009
- A model for prediction of time from corrosion initiation to corrosion crackingCement and Concrete Composites, 2007
- Structural reliability of concrete bridges including improved chloride-induced corrosion modelsStructural Safety, 2000
- An overview and sensitivity study of a multimechanistic chloride transport modelCement and Concrete Research, 1999