Development of a new mounting structure of yaw damper to reduce railway carbody vibration
Authors:
Open Access
- 1 January 2017
- journal article
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 83 (854) , 17-00078
Abstract
It is pointed out that the yaw dampers, which are often installed in between carbody and bogie frame of a high-speed railway vehicle, have such unfavorable points that the damping force is generated not only in the yawing direction but also in other direction. As a result the damping force is generated also to the longitudinal or pitching vibration of a bogie, and the excitation force acts in the longitudinal direction of the carbody resulting in the increase of the carbody vibration of the longitudinal or vertical direction. In this research, to enable the reduction of the excitation of the carbody vibration while maintaining the original function of yaw dampers to prevent bogie hunting motion, a new mounting structure of yaw dampers on railway vehicles has been developed. The new mounting structure enables to reduce the excitation force transmitted from a bogie frame to a carbody through yaw dampers. In this paper, the effect of yaw dampers on the carbody vertical vibration is firstly shown based on the results of an excitation test of a full-scale vehicle, then the outline of the new mounting structure for yaw dampers and the design and manufacture of the prototype device are presented. The vehicle dynamics model based on multi body dynamics was constructed and the suppression effect of the yaw damper force generated to movement in the direction other than the yawing direction of a bogie was verified by the numerical simulation. Moreover, the prototype device was installed on a full-scale test vehicle and a bogie hunting motion test was carried out to verify the running stability.Keywords
This publication has 16 references indexed in Scilit:
- Development of New Mounting Structure for Yaw Damper to Reduce Railway Carbody VibrationThe Proceedings of the Transportation and Logistics Conference, 2016
- A locomotive’s dynamic response to in-service parameter variations of its hydraulic yaw damperNonlinear Dynamics, 2014
- Prevention of Carbody Vibration of Railway Vehicles due to Rotation of Imbalanced Wheelsets and Validation Using Full Scale VehiclesTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2011
- Reduction of bending vibration in railway vehicle carbodies using carbody–bogie dynamic interactionVehicle System Dynamics, 2010
- Modal Analysis of Railway Vehicle Carbody by Using Linear Prediction Model(D & D 2008)TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2009
- Suppression of Bending Vibration of Railway Vehicle Carbody by using Carbody-Truck InteractionTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2004
- Effect of position of traction devices upon vertical vibration of railway vehicle carbodyThe Proceedings of the Transportation and Logistics Conference, 2003
- Investigation on Riding Comfort of Railway Vehicle by Changing the Specifications of Carbody, Trucks and Their Connecting Elements.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2000
- A Theoretical Analysis of the Railway Vehicle Vibrations Caused by the Wheelset Mass-ImbalanceVehicle System Dynamics, 1983
- A Fast Algorithm for the Simplified Theory of Rolling ContactVehicle System Dynamics, 1982